15:30-16:40
POSTER (DIALOGUE) SESSION PSA1: PERMANENT MAGNET MACHINES
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
141 |
A
Permanent Magnet Generator for Small Scale Wind Turbines |
J.R.
Bumby, N. Stannard and R. Martin |
UK |
|
|
313 |
A
Method for Dynamic Analysis of an Interior Permanent Magnet Motor Based on
Nonlinear Magnetic Circuit |
K.
Nakamura, M. Ishihara, and O. Ichinokura |
Japan |
|
|
163 |
High-speed
permanent magnet generators design and testing |
Yanush Danilevich, Victor Antipov |
Russia |
|
|
180 |
An
Attempt to Extend the Flux Weakening Range of a Single Stator Dual Rotor PM
Machine |
Imen Abdennadher, Ahmed Masmoudi and Ahmed
Elantably |
Tunisia |
|
|
234 |
Numerical
design of DC brush motor with
rare-earth magnets for ABS system
including tolerances of input parameters |
G.
Ombach, J. Junak and A. Ackva |
Germany |
|
|
244 |
A
Stator Turn Fault Tolerant Strategy for Interior PM Synchronous Motor
Drives in Safety Critical Applications |
Youngkook
Lee and T.G. Habetler |
USA |
|
|
245 |
Comparative Evaluation of Axial
Flux versus Radial Flux Permanent Magnet Synchronous Machines |
M.
Krishnamurthy, B. Fahimi and K. D. Oglesby |
USA |
|
|
249 |
Design
and Implementation of a Tubular Brushless DC Motor for Direct-Drive
Applications |
S.H.
Mao, B.J. Lin, and M.C. Tsai |
Taiwan |
|
|
250 |
Design
of Interior Permanent Magnet Motors for Smoothening Back-EMF Waveform |
H.S. Chen and M.C. Tsai |
Taiwan |
|
|
251 |
Development
of the Discontinuous Primary Permanent Magnet Linear Synchronous Motor |
Kenji
Suzuki, Yong-Jae Kim, Masaya Watada and Hideo Dohmeki |
Japan |
|
|
254 |
Optimised
design of concentrated winding PM brushless motors |
A.
Castagnini, P. Faure Ragani, G. Secondo |
Italy |
|
|
266 |
Evaluation
of Eddy Current Loss in Tubular Permanent Magnet Motors by Three-Dimensional
Finite Element Analysis |
J.
Chai, J. Wang and D. Howe |
UK |
|
|
267 |
Magnetic
Field Distribution in Brushless Permanent Magnet AC Motors with Interior
Permanent Magnets (IPM) and Slotted Stator |
F. Poltschak, W.Amrhein |
Austria |
|
|
274 |
A
Brushless Permanent Magnet Motor with Hybrid Windings |
M. C. Tsai and L. Y. Hsu |
Taiwan |
|
|
276 |
Torque
ripple reduction design of Multi-layer Interior Permanent Magnet Synchronour
Motor by using Response Surface Methodology |
Liang Fang, Soon-O Kwon, Peng
Zhang, Jung-Pyo Hong |
China |
|
|
311 |
Reluctance
Network Analysis Model of a Permanent Magnet Generator Considering an
Overhang Structure |
K.
Nakamura, M. Ishihara, and O. Ichinokura |
Japan |
|
|
312 |
Multipolar
Reluctance Generator Using Stator Core with Permanent Magnet |
O.
Ichinokura, T. Ono, T. Tashiro, K. Nakamura, and A. Takahashi |
Japan |
|
|
PSA1-18 |
346 |
Distribution,
coil-span and winding factors for AFPM with concentrated windings |
S. E.
Skaar, Ø. Krøvel |
Norway |
|
284 |
Application of a Toroidal Harmonic Expansion for Computing the Magnetic Field from a Balanced 6-Pole Permanent-Magnet Motor |
J. Selvaggi, S. Salon, O. Kwon, and M.V.K. Chari |
USA |
15:30-16:40
POSTER (DIALOGUE) SESSION PSA2: SYNCHRONOUS MACHINES
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
135 |
New Approach to Identification of Turbogenerator
Rotor Quantities |
G.
Rogozin, N. Pjatlina |
Ukraine |
|
|
188 |
About Currents from the Damping Winding Bars of
Three-phase Synchronous Generator Connected on Rectifier |
C. Nica, S. Enache, M. A. Enache |
Romania |
|
|
213 |
Time-stepping FEM Based Modeling of a Synchronous
Generator connected to infinite bus via a Delta-star Transformer |
Luo Ying-li, Zhang Xinli Meng Liang |
China |
|
|
214 |
The Analysis and Validation of Saturation Curve
Series of Synchronous Generators |
Zhang Xinli, Luo Yingli, Liu Xiaofang |
China |
|
|
217 |
Half-order modelling of turboalternators - An
adapted method of parameter identification |
S.
Racewicz, D. Riu, N. Retiere, P. Chrzan |
Poland |
|
|
221 |
Computation of Forces and Stresses in the Winding
Overhang of Large Hydrogenerators at Faulty Conditions |
Georg Traxler-Samek, Axel Fuerst, Alexander Schwery
and Carlos Ramirez |
Switzerland |
|
|
229 |
On the Identification of the Synchronous Machine
Parameters Using |
L. Vicol, M. Tu Xuan, J.-J. Simond, R. Wetter, I.A. Viorel
|
Switzerland |
|
|
233 |
A Comprehensive Algorithm for the estimation of
Synchronous Generator Parameters |
Elias
Kyriakides |
Cyprus |
|
|
247 |
Damping Shaft Torsional Oscillation of Synchronous
Generator by Fuzzy Logic-Controlled SMES |
Mohd.
Hasan Ali, Toshiaki Murata, and Junji Tamura |
Japan |
|
|
293 |
Special consideration in On-line Partial Discharge (PD)
Monitoring for Stator Insulation Condition Assessment of Large Steam-Turbo
Generators |
E. Sharifi, S. Amini, K. Rahmani |
Iran |
|
|
294 |
Stochastic Evaluation of Turbine-Generator Shaft
Torsional Torques in a Six-Phase Power System |
S.O. Faried and S. Aboreshaid |
Canada |
|
|
329 |
Design of A Steam-resistant Insulation System for
the Stator of A Low-voltage
Turbo-Generator |
V. Sihvo,
J. Pyrhönen |
Finland |
|
|
338 |
Numerical Modelling of Large Solid Pole Synchronous
Motors |
Ling Luo,
Chunting Mi, Haran Karmaker, Peter Zong and George Gao |
USA |
|
|
372 |
A Method of Eddy Current Calculation for Stator Core
Ends of Turbine Generators |
Katsumi Yamazaki, Yuta Watanabe |
Japan |
|
|
383 |
The Nonlinear Characteristics of Turbo-generator
under Abnormal Operating Conditions |
Kang Jinping, Luo Yingli, Wang Jing, Liu Xiaofang,
MengLiang |
China |
|
|
408 |
Pulsating
torques during starting of synchronous motors: Implementation and comparative
analysis of different measurement methods |
Christer
Danielsson, Holger Persson |
Sweden |
|
|
437 |
On the Design of a Remote Intelligent Excitation
Controller for a Synchronous Generator |
Yannis L. Karnavas, Nicolaos P. Polyzos, Demetrios
P. Papadopoulos |
Greece |
|
|
486 |
The influence of magnetic saturation towards the
induced voltage for homopolar synchronous generator |
Sorin Deaconu, Lucian Tutelea, Gabriel N. Popa, Iosif Popa |
Romania |
|
|
492 |
Analysis of Unbalanced Magnetic Pull in
Train-Lighting Brushless Alternators with Skewed Rotor under Static
Eccentricity and Conical Rotor Motion |
K.P.P. Pillai, Achuthsankar S. Nair, G.R. Bindu |
India |
|
|
497 |
Rotor monitoring tool for turbogenerators |
E. Guillot |
France |
|
|
498 |
Permeance network method coupling with experimental
design in order to optimize turbo-alternators |
Dmitry
Petrichenko, Michel Hecquet, Pascal Brochet, Vyacheslav Kuznetsov, Daniel
Laloy |
France |
|
|
508 |
Line-Switching Test Based Practical Approach for
Identification of Synchronous Machine Parameters |
R. Wamkeue, J. Christian, I. Kamwa |
Canada |
|
|
436 |
Behavior of Syncronous Generators with Rotor
Excentricity Evaluated by the Polarization Fixed Point Method |
I.R.Ciric, F.Hantila, M.Maricaru, and S.Marinescu |
Romania |
|
|
604 |
Limits of turbine generator’s underexcited operation |
Z.
Maljkovic, I. Gašparac, M. Pavlica |
Croatia |
|
|
639 |
Surface currents in solid poles of large synchronous
machines at direct start |
Yujing
Liu, Holger Persson |
Sweden |
|
|
685 |
Magnetic Unbalance in a Hydrogenerator's rotor and
its effects on the Synchronous machine |
A. Millan,
A. Romero |
Venezuela |
|
|
687 |
Steady-State Performance of a Hybrid Excitation
Single-Phase Synchronous Generator |
Nobuyuki Naoe, Tadashi Fukami, Akiyuki Minamide,
Kazuya Takemata |
Japan |
|
|
691 |
A BAS application of a Series Magnetized Synchronous
Machine |
D. Hagstedt, M. Alakula, T. Bergh |
Sweden |
15:30-16:40
POSTER (DIALOGUE) SESSION PSA3: INDUCTION MACHINES
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
584 |
Radial forces and torque ripples in split-phase
induction motors |
Lieven Vandevelde, Claus B. Rasmussen and Jan A. A.
Melkebeek |
Belgium |
|
|
119 |
A Complete Induction Motor Model for Low and High
Frequency Analysis |
A.
Boglietti, A. Cavagnino |
Italy |
|
|
202 |
A New Posibility for the Determination of the
Induction Machines Parameters |
S. Enache, A. Campeanu, |
Romania |
|
|
203 |
Influence of Magnetic Saturation on Induction Motor
Model Selection |
Marko
Hinkkanen, Anna-Kaisa Repo, Jorma Luomi |
Finland |
|
|
246 |
A Comparison of 3D Models for Determining Skin
Effect in Induction Motor End Rings |
C. del Perugia, R.D. Findlay, N. Stranges |
Canada |
|
|
252 |
The Comparison Study of Different Models Used for
Calculation of the Transient Processes of an Induction Motor During Frequency
and Soft Starting |
Maria
Dems, Krzysztof Komeza |
Poland |
|
|
269 |
Energy Efficiency of small Induction Machines: Comparison between Motor and Generator Mode |
Wim Deprez, Annick Dexters, Johan Driesen, Ronnie
Belmans |
Belgium |
|
|
279 |
Electromagnetic Excitation Forces in Small Induction
Motors |
Y. Yoshikuwa, A. Imagi, H. Kometani and J. Okada |
Japan |
|
|
289 |
Analysis of Induction Motor Static Eccentricity
using Time Stepping Finite Element |
M.B.B. Sharifian, J. Faiz, B.M. Ebrahimi |
Iran |
|
|
298 |
Using Improved Winding Function Theory and 2D Finite
Element Method to Model Air-Gap Eccentricity in Induction Motors |
E. Khosrowshahli, E. Sharifi Ghazvini, S. Shamloo |
Iran |
|
|
326 |
Detailed Transient Analysis of Self Excited
Induction Generator Feeding Induction Motor |
Mehmet
Akbaba, Amin M. Sultan, Ebrahim
Al-Gallaf |
Bahrain |
|
|
358 |
Die-cast Copper Rotor Motors via Simple Substitution
and Motor Redesign for Copper |
R. Kimmich, M. Doppelbauer, D.T. Peters, J.G. Cowie, E.F. Brush |
Germany |
|
|
365 |
The complete electrical supply characterization of
an induction motor that operates under a given NEMA unbalance |
L. F. Mantilla, M. A. Rodríguez |
Spain |
|
|
384 |
The Influence of Stochastic Properties on the Motor
Parameters of an Induction Machine |
C. Bastiaensen,
W. Deprez, S. Stevens, J. Driesen |
Belgium |
|
|
390 |
Optimization-Based Steady State Analysis of
Parallel-Operated Three Phase Induction Generators and Motors |
A. I. Alolah and
M. A.
Alkanhal |
|
|
|
391 |
Steady-State Analysis of a Mixed Faults Three-phase
Squirrel-cage Induction Motor using Time Stepping Finite Element Method |
B.M. Ebrahimi, J. Faiz and M.B.B. Sharifian |
Iran |
|
|
393 |
FE Torque Analysis of a Shaded-Pole Motor |
L. Petkovska, G. Cvetkovski, V. Sarac |
FYROM |
|
|
453 |
Stator-Tooth Optimization of an Induction Machine
with Squirrel-Cage Rotor |
C. Schlensok, S. Felgentrager, D. van Riesen, K.
Hameyer |
Germany |
|
|
458 |
Behaviour Analysis of Induction Machine Under Broken
Bars and Distorted Voltage Input |
J.
Kappatou, A. Safacas |
Greece |
|
|
463 |
Insulation Aging in AC motors due to mechanical
stresses |
J-Ph. Lecointe, S. Duchesne, R. Romary, J-F. Brudny, P. Schlupp |
France |
|
|
PSA3-21 |
200 |
Parallel Scheme for Estimation of Rotor Position and
Stator Resistance in Sensorless Speed Control of a Doubly Fed Induction
Machine |
R. Ghosn,
M. Pietrzak-David and B. de Fornel |
|
|
196 |
The influence of the frame and windings on the natural frequencies of stator
of |
S. L. Nau, B. C. Bork, H. L. V. dos Santos, N. Sadowski, R. Carlson |
Brazil |
|
|
140 |
A solid rotor induction machine for turbo-assist operation |
J.R. Bumby, E Spooner and M. Jagiela |
UK |
15:30-16:40
POSTER (DIALOGUE) SESSION PSA4: SPECIAL MACHINES
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
130 |
Revisiting the MMF Analysis of Asymmetrical
Two-Phase Induction Motors |
L. M. de Castro Neto, J. R. Camacho, H. R. de
Azevedo, S. C. Guimaraes, C. H. Salerno |
Brazil |
|
|
169 |
A New Hybrid Brushless dc Motor without Permanent
Magnet |
E. Afjei, M.A. Saati, M.M. Nezamabadi, S.Ataei |
Iran |
|
|
175 |
Modeling Techniques for Hybrid Excited Doubly
Salient Motor with Rotor Skewing |
Xiaoyong Zhu, Ming Cheng, Wenguang Li and Wei hua |
China |
|
|
191 |
A New Claw Pole Synchronous Machine with DC
Excitation in the Stator:a Comparison with the Conventional Claw Pole
Alternator |
H. Aloui, A. Masmoudi, M. Lecrivain and M. Gabsi |
Tunisia |
|
|
193 |
Magnetic Anisotropy considered for Synchronous
Claw-Pole Alternators with Axial Flux
Component |
S. Schulte, F. Henrotte, K. Hameyer |
Germany |
|
|
207 |
Model to Evaluate the Influence of the Winding Data
on the Brush Wear in Universal Motors |
A. Di
Gerlando, R. Perini |
Italy |
|
|
211 |
Performance of a Dual-Winding Reluctance
Generator With Multiple-Barrier Rotor |
Tadashi Fukami, Masatoshi Momiyama, Kazuo Shima,
Ryoichi Hanaoka, and Shinzo Takata |
Japan |
|
|
264 |
Electrostatic
Hysteresis Motor |
M. Crivii and M. Jufer |
Switzerland |
|
|
361 |
Some types of unconventional electromechanical
energy converters: application and classification |
I.
Shvedchikova |
Ukraine |
|
|
404 |
2D-FEM Modeling of an Axial-Flux Solid-Rotor
Induction Motor |
M. Valtonen, A. Parviainen and J. Pyrhönen, |
Finland |
|
|
412 |
Clawpole Transverse-Flux Machine with Hybrid Stator |
M. R. Dubois,
N. Dehlinger, H. Polinder, D. Massicotte |
Canada |
|
|
421 |
Light Structures for Low-Speed Multi-Pole Machines
for Direct-Drive Applications |
P.J.Tavner, E. Spooner |
UK |
|
|
439 |
Rotor Design and Performance for a BDFM |
P J Tavner, R A McMahon, P Roberts, E Abdi-Jalebi, X Wang, M Jagieła , T Chick
|
UK |
|
|
531 |
Limits and Advantages of Scaling as a Fast Procedure for Designing
Transverse Flux Motors |
Kang D H, Chang J H, Viorel I -A, Viorel Alina Cristina, Strete Larisa |
Korea |
|
|
578 |
Developement of Tubular Type Linear Generator for
Free-Piston Engine |
Jaewon Lim, Ho-Yong Choi, Sun-Ki Hong, Dong-Hyeok
Cho and Hyun-Kyo Jung |
Korea |
|
|
581 |
Brushless DC Motor with Frequency Generator
Substituted for Position Sensor |
Hiro Takano,
Mikihiro Kishio, Hideaki Nanko |
Japan |
|
|
589 |
Comparative Study on the equivalent circuit of the
electric motor and traveling wave piezoelectric ultrasonic motor |
Mircea
Ignat, George Zarnescu |
Romania |
|
|
606 |
High torque motor (vernier reluctance magnet
machine) for specific systems |
Ph. Enrici, J. Jac, N. Ziegler, D. Matt |
France |
|
|
647 |
Performance Comparison of Three and Four-Phase
Linear Tubular Stepping Motors |
W. Missaoui, L. El Amraoui Ouni, F. Gillon, M.
Benrejeb, P. Brochet |
France |
15:30-16:40
POSTER (DIALOGUE) SESSION PSA5: SUPERCONDUCTING MACHINES
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
348 |
Development of Synchronous Alternator with HTSC
Armature |
E.N. Andreev, L.I. Chubraeva, M.V. Manzuk, M.Yu.
Platonova, S.S. Timofeyev |
Russia |
|
|
347 |
Development of Three-Phase Transformer with HTSC
Windings and Amorphous Alloy Cores |
E.N. Andreev, L.I. Chubraeva, D.A. Korotkov, M.Yu.
Platonova, D.A. Volkov |
Russia |
|
|
544 |
Introducing complex engineering approach into
curricula by superconductivity |
I. Vajda, L. Farkas, S. C. Kashyap, D. K. Pandya |
Hungary |
|
|
610 |
Z.Kohari |
Hungary |
||
|
633 |
Nondestructive evaluation of electrical machines
using superconductor windings |
Raimond Grimberg, Adriana Savin, Rozina Steigmann,
Sorin Leitoiu, Alina Bruma |
Romania |
|
|
744 |
HTS HIA Generator and Motor for Marine Applications |
K. Sivasubramaniam, E.T. Laskaris, M. R. Shah, J. W.
Bray, N. R. Garrigan |
USA |
16:50-18:30
ORAL SESSION OSA1: PERMANENT MAGNET MACHINES
Athina1
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
235 |
Electromagnetic Design Analysis of Tooth Coil, Voltage Regulated, PM Synchronous
Generators |
A. Di Gerlando, G. M. Foglia, R. Perini, M. Ubaldini |
Italy |
|
|
156 |
Maximum Efficiency Operation of Interior Permanent
Magnet Synchronous Generator Based on
State Space Model |
Toshiaki Murata, Kazuhito Nakamura, Junji Tamura and
Takeshi Tsuchiya |
Japan |
|
|
352 |
Analysis of a High Pole Number Motor with
Assymetries Using a Reduced Model |
S. J. Salon, O-Mun Kwon, M.V.K. Chari |
USA |
|
|
426 |
Unbalanced Magnetic Pull in High-Speed Brushless
Permanent Magnet Motors – Experimental Observations and Results |
U.M. Hoefer, A.G. Jack, B.C. Mecrow |
UK |
|
|
457 |
Magnet Loss Analysis of Permanent-Magnet Synchronous Motors with Concentrated Windings |
C. Deak, A. Binder, and K. Magyari |
Germany |
16:50-18:30
ORAL SESSION OSA2: SYNCHRONOUS MACHINES
Athina2
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
216 |
Study on Frequency Characteristics of Synchronous
Generator Damper Circuit |
M.Kakiuchi, T.Otaka, S.Nagano, T.Tokumasu, M.Fujita,
K.Nagakura, J. Shiina, H.Ito, H.Shimada, D. Hiramatsu, K. Nagasaka |
Japan |
|
|
287 |
Connection to Weak Electrical Supply Network of Two
Synchronous Machines Operating in Recovery Regime |
A.
Campeanu, Mihai Radulescu, Marian Badica, Razvan Prejbeanu |
Romania |
|
|
343 |
Development of High-Temperature Superconducting
Electrical Machines at Siemens AG |
Gunar Klaus, Wolfgang Nick, Heinz-Werner
Neumüller, Georg Nerowski and William McCown |
Germany |
|
|
413 |
Effect of Voltage Swells on the Transient
Performance of Saturated Synchronous Motors |
Ahmed M. El-Serafi, Narayan C. Kar |
Canada |
|
|
562 |
Simplified 3D-effects modeling for low L/D Aspect
Synchronous Motors |
Di Wu,
|
USA |
16:50-18:30
ORAL SESSION OSA3: INDUCTION MACHINES
Athina3
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
345 |
The Effect of Practical Operating Conditions on the
Performance of Induction Machines |
Wim Deprez, Cindy Bastiaensen, Stijn Stevens, Ronnie
Belmans |
Belgium |
|
|
367 |
|
S. Englebretson, J.L. Kirtley Jr., K. Molina |
USA |
|
|
518 |
Induction Machine Analysis for the Diagnosis of
Rotor Faults Using the Leakage Magnetic Field |
J. Kappatou, C. Marchand, A. Razek |
Greece |
|
|
614 |
Estimating circuit models for a deep-bar Induction
Motor using the harmonic finite element analysis |
A.-K. Repo, A. Niemenmaa, A. Arkkio |
Finland |
|
|
206 |
DTC vs. FOC for an induction machine-based flywheel
energy storage system associated to a variable-speed wind generator –
Experimental results |
Gabriel Cimuca, Stefan Breban, Mircea M.
Radulescu,Christophe Saudemont, Benoît Robyns |
Romania |
Ariadne
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
110 |
Estimation of the Boundaries for the Claw-pole
Geometry in Electrical Water Pump Applications |
H.
Hembach, D. Gerling, S. Beyer |
Germany |
|
|
731 |
An Innovative Axial-Flux Multi-Stack Homopolar SRM |
P. Bolognesi, O. Bruno, L. Taponecco |
Italy |
|
|
323 |
Numerical Modeling of 3-D |
S. Wiak,
K. Smółka |
Poland |
|
|
434 |
Soft Magnetic Composite Axial flux seven-phase
machine |
F. Locment, E.Semail and F. Piriou |
France |
|
|
535 |
Dynamic Characteristics Analysis of 3D Conveyer
System Linear Induction Motor for Control Algorithm Developments |
Su jin Jeon, Sun bum Kwon, and Jung ho Lee |
Korea |
10:20-11:30
POSTER (DIALOGUE) SESSION PMM1: PERMANENT MAGNET MACHINES
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
340 |
Effect of Back-EMF Constraints on Fractional-Slot
Surface PM Machines Designed for |
Ayman M. EL-Refaie, Thomas M. Jahns, John W.
McKeever |
USA |
|
|
351 |
Torque ripple improvement with IPMSM rotor shape
modification |
S. Vivier, V. Lanfranchi, G. Friedrich |
France |
|
|
353 |
A Backstepping Controller for Sensorless Speed
Control of DC Servo Motor Using Adaptive Backstepping Observer |
A. Farrokh Payam, B. Mirzaeian Dehkordi |
Iran |
|
|
363 |
Torque ripple and cogging torque of surface mounted
PM machines with concentrated windings |
P.
Salminen, H. Jussila, M. Niemelä and J. Pyrhönen |
Finland |
|
|
368 |
Harmonic Current Injection Approach To Cogging
Torque Suppression In Axial Flux PM Synchronous Machines |
J.A. Tapia, D. Soto, A. Valenzuela, R. Wallace |
Chili |
|
|
369 |
Experimental Validation of an Axial Flux PM Machine
with Field Weakening Capability |
J. A. Tapia, D. Gonzalez, R. R. Wallace, M. A.
Valenzuela |
Chili |
|
|
382 |
An analytical equation for cogging torque
calculation in surface mounted permanent magnet motors |
K. Y. Lu, P. O. Rasmussen, E. Ritchie |
Denmark |
|
|
398 |
Toward Accurate Torque Calculation in Brushless
Permanent Magnet and Reluctance Motors |
John Simkin, Christopher P. Riley, and Alexandros M.
Michaelides |
UK |
|
|
406 |
Iron Loss Calculation in a Reciprocating Tubular
Permanent Magnet Motor with Soft Magnetic Composite |
T. Ibrahim, J. Wang, and D. Howe |
UK |
|
|
444 |
Determination of d and q reactances of
permanent-magnet synchronous motors using FEM |
J. A.
Güemes, A. M. Iraolagoitia and P. Fernández |
Spain |
|
|
455 |
Design parameters for directly network connected
non-salient permanent magnet synchronous generator |
J. Kinnunen, J. Pyrhönen, O. Liukkonen, P. Kurronen |
Finland |
|
|
456 |
Disk Built-in DC Motor With High Coercive Nd-Fe-B
Magnets |
M. Zagirnyak,
P. Belyi, D. Miljavec |
Ukraine |
|
|
477 |
Analytical vs. Numerical calculation of magnetic
circuits of PM Machines at no-load and load |
A.
Rastogi, A. Binder |
Germany |
|
|
566 |
Optimization Elements of the PM Excited Transverse
Flux Linear Motors |
D. H. Kang, P. Curiac |
Korea |
|
|
509 |
Experimental Tests on a 9-phase Direct Drive PM
Axial-Flux Synchronous Generator |
D. Vizireanu, X. Kestelyn, S.Brisset, P. Brochet,
E.Semail |
France |
|
|
529 |
Comparison
of non-salient pole permanent magnet motors structures for traction
application |
J. Figueroa, L.Radaorozandry, J.Cros, P. Viarouge |
Canada |
|
|
545 |
Modeling and controlling attractive forces in
permanent magnet machines |
M. Scuotto |
Netherlands |
|
|
551 |
Cogging
torque elimination in permanent magnet machines |
Bernard
Laporte |
France |
|
No |
Ref |
Paper title |
Authors |
Country of the corresponding author |
|
120 |
Induction Motor Control using Predictive Algorithm |
E.S. de Santana, E. Bim and W.C. do Amaral |
Brazil |
|
|
133 |
Closed-Form Analytical Investigation of Electromagnetic Torque-Ripple Components in
|
J. Klima |
Czech Republic |
|
|
172 |
Robust Sensorless Operation of Vector Controlled AC
motors using Extended Kalman Filter trained neural networks |
Vedam
Subrahmanyam |
India |
|
|
189 |
Control Limits of Three Phase AC Controller under
Induction Motor Load |
A.I. Alolah,
R.M. Hamouda and A. Eltamely |
Saudi Arabia |
|
|
258 |
Improved Rotor Flux Linkage Oriented Control of an Induction
Motor with Included Magnetic Saturation |
D.
Dolinar, G. Stumberger, P. Ljusev |
Slovenia |
|
|
322 |
High Performance Field Oriented Rotor Control of
Induction Generators |
V.
Cecconi, V. Di Dio, A. O. Di Tommaso, D. La Cascia, R. Miceli |
Italy |
|
|
357 |
Induction Motor Control using Variable Structure
Approach |
Amar Golea, Abdelhakim Saiad,
Noureddine Golea, Naziha Benounnas |
Algeria |
|
|
438 |
Computer investigation of the dynamic behaviour of
an asynchronous motor using fuzzy logic for immediate torque control |
Z. Koutsogiannis,
G. Adamidis, A. Fyntanakis, |
Greece |
|
|
447 |
Microscopic Investigation of Energy Conversion in a
|
M. Krishnamurthy and B. Fahim |
USA |
|
|
449 |
In Wind-Unwind Application the Comparative
Realization of Tension Control with Induction Motors Which are Run by
Different Controlled Techniques |
N. Bekiroglu and E. Aycicek |
Turkey |
|
|
423 |
Optimal speed trajectory tracking of an AC motor
drive system with simultaneous fuzzy
logic minimization of its electromechanical losses |
Eleftheria
S. Sergaki, George S. Stavrakakis, |
Greece |
|
|
465 |
Adaptive Fuzzy Control of Reversible Rectifier
Feeding Induction Motor with Improved Power Factor |
M.T. Benchouia , M.E.H. Benbouzid, A. Golea, S.E. Zouzou and A. Ghamri |
Algeria |
|
|
485 |
Development of a Wavelet theory-based Field-Oriented
Control method for small power Electrical Machines |
E.
Mitronikas |
Greece |
|
|
488 |
Robust Parameter Estimation Procedures for Vector
Controlled Induction Machine Drives |
Carlos H. S. De Vasconcelos, Zelia M. Assis Peixoto |
Brazil |
|
|
489 |
Robust Flux Weakening Operation of Induction Motor
Drives Based on Stator Flux Vector Control |
D.Casadei, G. Serra, A. Tani, L.Zarri |
Italy |
|
|
496 |
Inverter Nonlinearities Compensation in a Double Fed
Induction Motor Drive close to Synchronous Speed |
M.S. Carmeli, F. Castelli Dezza, R.
Perini |
Italy |
|
|
539 |
Design of a Robust voltage controller for an
induction generator in an autonomous power system |
Alon Kuperman,
Vitaly Spitsa, Raul Rabinovici, Ezra Zeev, George Weiss |
Israel |
|
|
554 |
Design of Transient Excitation Sequences for
Sensorless Control of AC Machines |
Th.M. Wolbank, J.L. Machl |
Austria |
|
|
588 |
Vectored Direct Torque Control for Induction Motor
under Losses Minimization |
Hmidet Ali, Bacha Faouzi, Dhifaoui Rachid |
Tunisia |
|
|
594 |
Transient states of polymerizer drive including real
load of specially designed induction motor |
A. Rusek, A. Popenda |
Poland |
|
|
662 |
Modified Field Oriented Control of Induction Machine |
Samir
Moulahoum, Omar Touhami |
Algeria |
|
|
736 |
PWM Waveform impact on Induction Motor Drive
Efficiency |
Z. Papazacharopoulos, |
Greece |
|
|
803 |
Power factor monitoring of induction machines by
using rotor flux oriented vector control |
D. Raptis, A. Kladas and J. Tegopoulos |
Greece |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
362 |
Tooth Concentrated Fractional Windings for Low Speed
Three Phase a.c. Machines |
M. Cistelecan, B. Cosan, M. Popescu |
Romania |
|
|
385 |
The Implementation of Computational Fluid Dynamics
and Electromagnetic Finite Element Methods as Standard Design Tools for Large
Synchronous Generators |
B. Streibl, E. Schlemmer, J. Schönauer and F.
Ramsauer |
Austria |
|
|
386 |
Design of Plastic Bounded Iron Powder Core Motors |
A. Reinap,
M. Alaküla |
Sweden |
|
|
464 |
Optimum designed induction motors with die-cast
aluminum and copper cages – a
comparative study |
W.
Jazdzynski |
Poland |
|
|
555 |
A Rational Way Combining Analytical and Numerical
Models with Deterministic Global Optimization Algorithms for the Design of
Electrical Machines |
J. Fontchastagner, F. Messine, Y. Lefevre |
France |
|
|
726 |
Preliminary Design and FEM Analysis of a
Rotary-Linear Brushless Machine |
P.
Bolognesi, L. Taponecco |
Italy |
|
|
716 |
On the optimal choice of the end ring resistance for
one slot per pole per phase single phase induction motors |
M.
Poloujadoff |
France |
|
|
134 |
Hegel’s Dialectical Method as a Means for Activating
the Students’ Thinking during Delivering the Lectures on the Transients in
Induction Motors |
G. Rogozin |
Ukraine |
|
|
192 |
Real Time Phasor Diagram of Synchronous Machine as
an Educational Tool |
D. Makuc,
M. Berlec, K. Lenasi |
Slovenia |
|
|
204 |
Development of Wind Turbines Prototyping Software
Under Matlab/Simulink®Through Undergraduate Student Projects |
M.E.H. Benbouzid, D. Diallo, Y. Amirat, H. Mangel
and A. Mamoune |
France |
|
|
333 |
Development and implementation of an automated
computer aided laboratory exercise integrated in electrical drives courses |
I.
Tsoumas, A. Safacas |
Greece |
|
|
450 |
Free Fall Attraction as a Practical and Theoretical
Project in Electrical Engineering Education |
F. Carlsson, J. Soulard |
Sweden |
|
|
514 |
Teaching numeric modeling and design of electrical
devices |
A.Reinap |
Estonia |
|
|
692 |
Education modernization of Electric Power
Engineering Education at Budapest University of Technology and Economics |
I. Vajda,
S. Halasz |
Hungary |
|
|
661 |
Animation Model bank for Electrical Machinery
Teaching |
Luo Yingli, Chen Xiqiang, Zhang
Jianhua, Wang Jing, Wang Hao, |
China |
|
|
630 |
Preparation measurements scripts, analysis,
selection of measuring apparatus units for education process aims diagnostics
of rotary machines on example car alternator |
Konrad
Skowronek, Artur Wozniak |
Poland |
|
|
650 |
Design Considerations for a |
Sam J. Nall and Phil H. Mellor |
|
|
|
171 |
Skew Effect Parameters of AC Machines with Skewed Slots |
Vedam Subrahmanyam |
India |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
105 |
Digital Calculation of Frequency of Sinusoidal
Signal |
T. Benslimane |
Algeria |
|
|
114 |
A Simplified Online-technique for the Detection of
Eccentricity in Induction Motor |
Pedro V. Jover Rodriguez, J. A. Antonino,
E. Munoz, Antero
Arkkio |
Finland |
|
|
115 |
Wavelet Analysis for the Detection of Inter-turn
Short-circuits and Broken Rotor Bars in Induction Machines |
J. A.
Antonino, P. Jover, M. Riera, A. Arkkio, J. Roger-Folch |
Spain |
|
|
157 |
Development of a Small Spherical AC Servo Motor for
Laser Tracker |
T. Yano, T.Takatuji, S.Osawa, Y.Motomura, T.Itabe,
T.Suzuki |
Japan |
|
|
220 |
A new approach for EMI simulation of complex
electrical systems |
E. Napieralska, D. Roger, K. Komeza |
France |
|
|
230 |
Modified Method to Determine Rotor-Bar-Iron
Resistance in Three-Phase Copper Squirrel-Cage Induction Motors |
Konrad
Dabala |
Poland |
|
|
304 |
Electromechanical system for static force
measurements on keyboard musical instruments |
Emmanuel Baudet, Patrick Ragot, Miroslav Markovic
and Yves Perriard |
Switzerland |
|
|
178 |
Test-Bench for High-Speed High-Power Electrical
Drives |
Dieter Gerling, Rainer Hildebrand, Harald Hofmann,
Kathrin Jungnickel, Benno Lange |
Germany |
|
|
394 |
Stator Winding Resistance Measurement of Inverter-
Fed Induction Machines |
Y.
Plotkin, M. Stiebler, M. Centner |
Germany |
|
|
487 |
Measurement and detection of Barkhausen Noise: the
time-domain approach |
B. Guinand, R.Goyet, O. Garrigues |
France |
|
|
542 |
A Hybrid Algorithm for the Non Destructive Testing
of the Magnetic Materials |
A.Nouicer , M.E.H.Latreche and M.Feliachi |
Algeria |
|
|
154 |
Vibration Sparking, an unrecognized damage mechanism
of High Voltage Windings |
Manfred
Liese |
Germany |
|
|
577 |
Validity of numerical impulse response test in
studying unbalanced magnetic pull in electrical machines with parallel stator
windings |
Andrej
Burakov and Antero Arkkio |
Finland |
|
|
611 |
On-line monitoring of the induction motor stator
windings temperature by using the modulating function approach |
A. Balestrino, O. Bruno, A. Landi, L. Sani |
Italy |
|
|
506 |
Impedance Vector Monitoring strategy for on-line
detection of eccentricity in induction motors |
Andreas
Stavrou |
Greece |
|
|
704 |
An Effective Technique on Extracting Negative
Sequence Harmonic Information in Stator Current Based Induction Motor
Condition Monitoring |
Long Wu, Zhi Gao, Thomas G. Habetler, and Ronald G.
Harley |
USA |
|
|
127 |
Space Flux Pattern of DC-brushless Motor |
F. Ishibashi, T.Takemasa, T.Nishizawa, S.Noda |
Japan |
|
|
131 |
Comparison of Vibration Characteristics of 3-phase
Permanent Magnet Machines with Concentrated, Distributed and Modular Windings
|
J. Wang, Z. P. Xia and D. Howe |
UK |
|
|
144 |
Acoustic Optimization of a Switched Reluctance
Machine using Numerical Simulation |
B.
Schmulling, K. Kasper, K. Hameyer |
Germany |
|
|
305 |
A New Structure for Stator Pole to Reduce Torque
Ripple and Acoustic Noise in Switched Reluctance Motor |
M. Bahramgiri,
M. Besmi, M. Babaei, M. Sahebzamani |
Iran |
|
|
335 |
Vibrations optimization of brushless power steering
motor with taking into account magnetostriction effects |
G. Ombach, J. Junak and A. Ackva |
Germany |
|
|
359 |
Noise Reduction using Multi-Phase Windings for
Synchronous Machines |
S.
Schulte, K. Hameyer |
Germany |
|
|
387 |
A coupled magnetic, structural and acoustic model of
the alternator |
M. Furlan, R.Rebec, A. Černigoj, D.
Čelič, M. Boltežar |
Slovenia |
|
|
388 |
Modeling and verification of magnetic forces in the
alternator |
A.
Černigoj, M. Furlan |
Slovenia |
|
|
468 |
Acoustic Measurement for detecting Manufacturing
Faults in Electrical Machines |
D. van Riesen, C. Schlensok, F. Henrotte, K. Hameyer |
Belgium |
|
|
601 |
Permanent
magnet synchronous machine simulations to predict vibrations and acoustic
noise |
S. Bujacz,
M. Hecquet, M. Goueygou, P. Brochet, J. Nieznanski |
Poland |
|
|
694 |
Vibroacoustic Methods in the Diagnosis of the
Electric Machines |
Horia Balan, Radu Tirnovan, Aurel Botezan, Antoniu Turcu, Petros Karaissas, Radu Balan |
Romania |
|
|
712 |
A fast noise predictive multiphysical model of the
PWM-controlled Asynchronous Machine |
J. Le Besnerais, A. Fasquelle, M. Hecquet, V. Lanfranchi, P. Brochet, |
France |
|
|
728 |
Magneto-elastic Coupling model for the study of Vibrations
in a Thin Plate |
F. Hocini,
H. Mohellebi |
Algeria |
|
|
709 |
An effective test bench for PM synchronous motor
characterization |
L. Sgarbossa, M. Dai Pre, S. Bolognani |
Italy |
11:40-13:20
ORAL SESSION OMM1: PERMANENT MAGNET MACHINES
Athina1
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
137 |
Comparative study of 2-phase Flux-Switching and
Doubly-Salient Permanent Magnet Brushless Machines |
Wei Hua,
Ming Cheng, Z.Q. Zhu and D. Howe |
China |
|
|
467 |
Cogging Torque Analysis on PMSM Machines by
Simulation and Measurement |
D. van Riesen, C. Schlensok, B. Schmulling,
M. Schoning, K. Hameyer |
Germany |
|
|
397 |
A general design strategy for multiphase machine
applied to the design of a 7-phase fractional slot concentrated winding PM
Machine |
F. Scuiller, JF Charpentier, E. Semail, S. Clenet |
France |
|
|
399 |
Maximum torque and inductances of surface mounted PM
machines |
P.
Salminen, A. Parviainen, and J. Pyrhönen |
Finland |
|
|
684 |
Physical Modeling of PM Synchronous Machine With
Short Circuit Winding Faults Based on Circuit-Field Coupled FE Analysis |
O. A. Mohammed, S. Liu, and Z. Liu |
USA |
Athina2
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
100 |
Stator Winding Design for Multi-Phase Two-Motor
Drives with Single VSI Supply |
E.Levi, M.Jones, S.N.Vukosavic and H.A.Toliyat |
UK |
|
|
673 |
Field Oriented Control of self-excited Induction Generator |
A. Bellini, G. Franceschini, E. Lorenzani, C. Iori, C.
Tassoni |
Italy |
|
|
261 |
Dynamic behaviour of Low Power and Low Cost
Induction Machine Drives with Single Shunt |
K.
Kanelis, W. Zeng |
Germany |
|
|
371 |
Operational Behaviour of a Vector Controlled
Induction Machine Drive System fed by a Three-Phase Space-Vector Modulated
Matrix Converter |
P. Potamianos, E. Mitronikas, A. Safacas |
Greece |
|
|
563 |
Self–Tuning Speed Controller Of Indirect
Field–Oriented Induction Machine Drives |
M. Masiala
and A. Knight |
Canada |
11:40-13:20
ORAL SESSION OMM3: DESIGN OF ELECTRIC
MACHINES
Athina3
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
113 |
Design Studies on Squirrel Cage Induction Motors
with Transient Finite Element Calculations and Directly Coupled Circuits |
C. Grabner |
Germany |
|
|
212 |
Advancements
in Electric Machines |
Jacek F.
Gieras |
USA |
|
|
265 |
Optimization of a Toothless BLDC Motor with
Faulhaber Winding using a Multiphysic Analytical Model |
P. Ragot, M. Markovic, Y. Perriard |
Switzerland |
|
|
525 |
Innovating engineering-focused software solution for
rotating electrical machines |
G. Lacombe, A. Foggia, Y. Maréchal, X. Brunotte |
France |
|
|
695 |
Calculation of Stator Slot Harmonic Fields |
S. Williamson and Y.N. Feng |
UK |
11:40-13:20 ORAL SESSION OMM4: TEACHING
Ariadne
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
282 |
A novel Web platform dedicated to teach Power Electronics
laboratory exercises |
I.C
Kobougias, A.C. Nanakos, N.P. Filippas, E.C. Tatakis |
Greece |
|
|
519 |
Teaching Electrical Engineering Students in Creative
Design |
T.Jokinen |
Finland |
|
|
617 |
Java applets of electrical machines support
laboratory work |
M.
Centner, R. Hanitsch |
Germany |
|
|
570 |
Computational Electromagnetics in the Teaching
Environment of an Electrical Machines Laboratory – A Small Magnetic Levitator
|
Paulo G. Pereirinha and Carlos Lemos Antunes |
Portugal |
|
|
648 |
Teaching Electric Drives: a Comparison of Basic
Modeling and Real Industrial A.C. Drives |
A. Molina-Garcia, E. Gomez, J.A. Fuentes and J.A.
Villarejo |
Spain |
14:30-15:40
POSTER (DIALOGUE) SESSION PMA1: PERMANENT MAGNET MACHINES
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
572 |
Development of a shaft-mounted permanent magnet
generator for brushless excitation systems of turbo-generators |
A.
Nakahara, K. Takahashi, A. Semba, F.Goto, K. Hattori, and M.Saeki |
Japan |
|
|
580 |
Effect of the Presence of Magnetic Wedges on
Saturated Self and Cross-Coupling Inductances of Permanent Magnet Synchronous
Motors |
R. Lateb, F. Meïbody-Tabar, N. Takorabet, J.
Enon, A. Sarribouette |
France |
|
|
590 |
Efficiency Comparison of In-wheel PM Motors for Bus
Propulsion |
M. Andriollo, G. Bettanini, A. Morini, G. Martinelli,
A. Tortella |
Italy |
|
|
591 |
Study on Optimal Design of Concentrated Winding
IPMSM with |
S. I. Kim, J. H. Bhan, J. P. Hong |
Korea |
|
|
609 |
Comparison of permanent magnet synchronous machines
with distributed and concentrated windings |
R.
Nuscheler |
Germany |
|
|
615 |
Steady-State and Transient Performance Analysis for
Line-Start Permanent-Magnet Synchronous Motors with Skewed Slots |
K.
Kurihara, T. Monzen, and M. Hori |
Japan |
|
|
629 |
Permanent Magnet 3 MW Low-Speed Generator
Development |
J. Pyrhönen, P. Kurronen |
Finland |
|
|
683 |
A Method for Time-Domain Analysis of
Permanent-Magnet Brushless Motors Using Permeance Network Approach |
L. Ovacik, S. Alkan, B. Kemence |
Turkey |
|
|
698 |
Performance Evaluation of PM DC Commutator Motor
Based on FE Analysis |
G.
Cvetkovski and L. Petkovska |
FYROM |
|
|
725 |
Vector Control of a Trapezoidal Back-EMF PMSM
Machine for High Speed Applications |
A. Lidozzi, L. Solero, A. Di Napoli, P. M. Kshirsagar, R. Burgos, D. Boroyevich |
Italy |
|
|
635 |
Performance comparison of IPMSM with distributed and
concentrated windings |
Soon O Kwon, Sung Il Kim, Jung Pyo Hong |
Korea |
|
|
636 |
Reduction of the cogging torques of
permanent-magnet excited motors with
radial flux by the pole-shifting method |
Marlene
Marinescu, Nicolae Marinescu |
Germany |
|
|
667 |
Study and Optimisation of an Electrical Generator
with Original Structure |
M.
Benseti, P. Dessante, P. Vidal, J.C. Vannier,
C. Marchand |
France |
|
|
696 |
Influence of magnetic materials on maximum power
limits of permanent magnet synchronous machines |
R.
Missoum, N. Bernard, M.E Zaim, J. Bonnefous |
France |
|
|
703 |
Design Guidelines for the Optimisation of a Switched
Permanent Magnet Motor |
D. Andessner, W. Amrhein, M. Huber, G. Jungmayr |
Austria |
|
|
706 |
Optimal design based on 2D analytical model of axial
flux permanent magnet synchronous machine |
J. Azzouzi, N. Abdel Karim, G. Barakat, B. Dakyo |
France |
|
|
740 |
Permanent Magnet Machines with Concentrated Windings |
Ekkehard
Bolte, Burghard Kipp |
Germany |
|
|
735 |
Integrated Design Process and Experimental Verification of a 50 kW Interior Permanent Magnet Synchronous Machine |
M. Aydin, M. K. Guven, Seok-Hee Han and T. M. Jahns |
USA |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
332 |
Mathematical Modeling and Numerical Simulation of
the H2 Robust Controlled Stepping Motor-based Systems |
Szász
Csaba |
Romania |
|
|
582 |
Sensorless Direct Torque Control of Switched
Reluctance Motor Using Artificial Neural Networks |
Fuat Kucuk Hiroki Goto Hai-Jiao Guo Osamu Ichinokura |
Japan |
|
|
583 |
A Novel Position Sensorless Drive of SR Motors Based
on Direct Torque Control |
M. Mitani, H. Goto, H. J. Guo and O. Ichinokura |
Japan |
|
|
538 |
A Real-Time environment for industrial electrical
drive control board testing |
G. Bucca, F.L. Mapelli,M. Mauri |
Italy |
|
|
587 |
A Drive Circuit of Switched Reluctance Motors using
Three-phase Power Modules |
H. Goto, H. J. Guo |
Japan |
|
|
116 |
A New Converter Topology for a Hybrid Brushless dc
Motor without Permanent Magnet |
E. Afjei, M.A. Saati, M.M. Nezamabadi and S. Ataei |
Iran |
|
|
201 |
Wide Speed Control of a Hybrid Excited Synchronous
Machine |
D.
Fodorean, I.-A. Viorel, A. Djerdir, A. Miraoui |
France |
|
|
330 |
Human Brain Modeling of Motor Control |
Akshay S.
Patwal |
India |
|
|
401 |
Variable Current Control of A Five Axis Magnetically
Levitated Turbomolecular Pump |
M. N. Şahinkaya, A. E. Hartavi and R. N. Tuncay |
Turkey |
|
|
435 |
A vector controlled axial flux seven-phase machine
in default mode |
F. Locment, E.Semail and X. Kestelyn |
France |
|
|
442 |
Modeling resolvers for their application in high
performance drives |
J.-Ph.
Conard, F. Labrique, P. Sente |
Belgium |
|
|
443 |
Influence of the drive system on the performance of
a magnetic levitated disk |
H.
Polinder, C.S.P. Tol, P.M. Overschie, J.W. Spronck |
Netherlands |
|
|
451 |
High |
W.-R.
Canders, M. R. Rezaei |
Germany |
|
|
495 |
Mechatronics traction control design to improve
comfort of a tyred electrical tramcar |
G. Bucca, F.L. Mapelli, M. Mauri |
Italy |
|
|
504 |
An Efficient |
George A. Christopoulos and Athanasios N. Safacas |
Greece |
|
|
275 |
An Integrated Drive Circuit for Travelling Wave
Ultrasonic Motor |
Ch. Patsios,
C. Efstathiou, E. C. Tatakis, A. Tzes |
Greece |
|
|
314 |
Electrical Drive Assisted Mobility of Paraplegic
Patients |
Harald
Hofmann, Dieter Gerling, Johann Szecsi |
Germany |
|
|
574 |
On a Control System
Design Using the
Partial Model Model
Maching of Controlled
Processes |
F.F.Shoji,
N.Takazaki and H.H.Lee |
Japan |
|
|
729 |
|
M.Jones, E.Levi and S.N.Vukosavic |
UK |
|
|
732 |
Simulation of common-bus drivers with use of Object
Oriented Programming |
Krystyna Macek-Kaminska, Marcin Kaminski |
Poland |
14:30-15:40
POSTER (DIALOGUE) SESSION PMA3: INDUCTION MACHINES
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
507 |
Artificial Neural Network Based Identification of
Nonlinear Model of Induction Machines |
R. Wamkeue, F. Baetscher, I. Kamwa |
Canada |
|
|
512 |
Thrust ripple reduction of linear induction motor by
using additional inductances |
T. Utsumi and |
Japan |
|
|
521 |
Modeling of Split-Phase Induction Machine using
Rotating Field Theory |
P. Scavenius Anderson and D. G Dorrell |
UK |
|
|
523 |
A Novel Energy Saving Control Method of Motors Used
for Multi-mode Gravity load |
Cui Xueshen, Luo yingli, Liu xiaofang, Zhang
liancheng, Wangyilong |
China |
|
|
527 |
Analysis of the three-phase induction motor with
spiral sheet rotor |
Ramon Mujal-Rosas, Oriol Boix-Aragones |
Spain |
|
|
532 |
Characteristics of End-effect Compensator using
Magnet Rotator for Linear Induction Motor |
N. Fujii, T. Yoshihara |
Japan |
|
|
549 |
Three-Phase Induction Motor Simulation Model Based
on a Multifrequency Per-Phase Equivalent Circuit Considering Stator-Winding
MMF Spatial Harmonics and Thermal Parameters |
F. J. T. E. Ferreira, A. T. de Almeida, and G.
Baoming |
Portugal |
|
|
550 |
Considerations on the Custom Design of the
Stator-Winding of Low-Voltage, Three-Phase, Cage Induction Motors to Improve
their Efficiency and Reliability |
F. J. T. E. Ferreira and A. T. de Almeida |
Portugal |
|
|
552 |
Torsional Dynamics of Generator-Units During The
Start-up of The Induction Motor |
M.
Mirosevic, Z. Maljkovic |
Croatia |
|
|
565 |
Notes About Inductances Calculation of Induction
Motor Under Radial And Axial Air-gap Eccentricity |
A. Ghoggal , S.E. Zouzou |
Algeria |
|
|
586 |
Improving
Three-Phase Induction Motor Efficiency by the Optimized Design With
Copper Rotor Cage |
P-W. Han, Y-D.Chun, D-H. Koo |
Korea |
|
|
618 |
Finite – Element techniques enhancing the
traditional analytical induction motor design procedure |
M.
Centner, R. Hanitsch |
Germany |
|
|
620 |
Study on the Bearing Currents Activity in Cage
Induction Motors using Finite-Element Method |
F. J. T. E. Ferreira , P. Pereirinha and A. T de
Almeida |
Portugal |
|
|
627 |
Modelling of a Squirrel-cage Linear Induction Motor
by Space Harmonics |
Ana Julia Escalada, Javier Poza, Sergio Luri,
Antonio González |
Spain |
|
|
631 |
Reduction of Harmincs of Single Phase Induction
Motors with a |
J. P. Bacher |
Austria |
|
|
672 |
Frequential modelling of induction machine in view
of phase currents simulation |
M. Belhaj, P. Guérin, M.E. Zaim |
France |
|
|
677 |
Analysis of rotor slot harmonics rotation in
squirrel cage induction machines |
M.Y.
Kaikaa, A. Khezzar, M. Boucherma and M.E.K. Oumaamar |
Algeria |
|
|
678 |
An Analytical Analysis for Self-Excited Induction
Generator |
L. Louze,
A. Khezzar and M. Boucherma |
Algeria |
|
|
717 |
Full-Load and Half-Load Efficiency as
Characteristics of Energy Efficiency Induction Motors at all Loads |
M. Kostic |
Serbia |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
231 |
Study of dynamic regimes at direct current motors by
numerical methods |
I. Vlad, A. Campeanu, S. Enache |
Romania |
|
|
602 |
Estimation of the electrical and mechanical
parameters of a permanent magnet dc motor model taking into account the
oscillations of the induced voltage |
Roland R. Seebacher, Guenther Dannerer, Klaus Krischan,
Georg Ofner |
Austria |
|
|
656 |
Spectral Analysis of Signals of Commutator DC Motor |
Z. Głowacz and A. Zdrojewski |
Poland |
|
|
272 |
Computer Simulation of Actuators Working on
Principle of Thermoelasticity |
M. Pantelyat, Y. Matyukhin, P. Gontarowskiy, I. Doležel, P. Karban, B. Ulrych |
Czech Republic |
|
|
402 |
Istvan Zador - Bence Falvy - Istvan Vajda |
Hungary |
||
|
416 |
StackedType Electrostatic
Actuator with Squared Thick Electrodes |
Kazuo Okuda, Yoshiyuki Hata and Keiji Saneyoshi |
Japan |
|
|
480 |
Two cogging force minimization applied to a linear
actuator |
G.Krebs, A.Tounzi, B.Pauwels, D.Willemot, F.Piriou |
France |
|
|
490 |
Integrated Electromagnetic-Thermal-Mechanical Design
of Tubular Permanent Magnet Actuators |
D.Casadei, F. Milanesi, G. Serra, A. Tani, L.Zarri |
Italy |
|
|
522 |
Electromagnetic Valve Controlled Internal Combustion
Engines: a Comparison Between Two Major Topologies |
H. Aloui,
M. Gabsi,H. Ben Ahmed and M. Lecrivain |
France |
|
|
612 |
Smart BLDC actuator with an integrated mechanical
clutch |
J. Tbatou,
D. Prudham, L. Billet |
France |
|
|
641 |
A multi-air-gaps linear electric actuator design
using finite elements methods |
N. Ziegler, D.Matt, J.Jac ,P. Enrici |
France |
|
|
642 |
Selection of the Soft Magnetic Materials for a High
Precision Positioning System Design |
A. Lebedev, E. Lomonova, D. Laro, A. Vandenput |
Netherlands |
|
|
645 |
Passive and Active Constant Force-Displacement
Characteristics of a Long-Stroke Linear Actuator |
L. Encica, J. Paulides, E. Lomonova, A. Vandenpu |
Netherlands |
|
|
697 |
Design and optimization of a clutch magnet actuator |
V.
Pauvert, N. Bernard, M.E. Zaïm, J. Bonnefous |
France |
|
|
658 |
Torque Analysis of Various Microshutter Actuators Using Virtual Work Principle |
Hong-Joo Lee, Sang-Moon Hwang and Tae-Soon Kim |
Korea |
|
|
659 |
Development of microspeaker with a linear air gap in mobile phones |
|
Korea |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
378 |
Adjustable-Angle Triangular Lossy DNG Slabs with
Enhanced Focusing Capabilities |
D. L. Sounas, N. V. Kantartzis, and T. D. Tsiboukis |
Greece |
|
|
411 |
Effect of Machining on the Properties of Resin-Based
Soft Magnetic Composites |
M. R. Dubois, P. Lemieux,
C. Cyr, D. Massicotte |
Canada |
|
|
417 |
Eddy Current Losses and Demagnetization in Permanent
Magnets |
C. da
Silva, Z. Makni, M. Besbes, C. Marchand, Adel Razek and Renato Carlson |
Brazil |
|
|
730 |
Optimization Material Distribution in Ferromagnetic
Electromagnet |
P. Boissoles, H. Ben Ahmed, M. Pierre, B. Multon |
France |
|
|
741 |
Variation of Magnetic Flux Density with Distance
from the Cut Edge of Grain Oriented Electrical Steel |
G. Loizos,
A. J. Moses |
Greece |
|
|
334 |
Investigation of thermal ageing process of NdFeB
magnets |
Istvan
Meszaros |
Hungary |
|
|
259 |
Interlaminar Losses Evaluation in Electrical
Machines Stators |
E. J.
Meurer, N. J. Batistela, R. Carlson, N. Sadowski, L. Von Dokonal, A. A. de
Espindola |
Brazil |
|
|
270 |
Additional Eddy Current Losses in the Stator
Clamping System of Large Hydro Generators caused by the Third Harmonic of the
Airgap Field |
Erich Schmidt, Georg Traxler-Samek, Alexander Schwery |
Austria |
|
|
297 |
Calculation of losses in retaining sleeves of high
speed permanent magnet brushless machines: simple analytical approach versus
finite element method |
Dan M. Saban, Jacek F. Gieras, and Thomas A. Lipo |
USA |
|
|
302 |
Influence of Perpendicular Flux in Laminated Core
and Core Losses |
H. Mogi, C. Kaido, S. Kanao, Y.Mishima, K. Yamazaki,
Y. Watanabe A. Nakahara, K. Takahashi, K. Ide, K. Hattori, and T. Watanabe |
Japan |
|
|
500 |
Iron losses distribution in a railway traction
induction motor |
A. Fasquelle, A. Ansel, S. Brisset,
M. Hecquet, P. Brochet, A. Randria |
France |
|
|
548 |
Circulating Currents in the Parallel Stator
Conductors of Electrical Machines |
M. J.
Islam, A. Arkkio |
Finland |
|
|
556 |
Modeling the eddy currents in conducting sleeves by
an analytical field calculation method |
M. Leroy, C. Henaux , B. Nogarede |
France |
|
|
569 |
Polarization Effect on Iron Losses in Induction
Motors |
L. T. Ergene,
S. J. Salon, R.C. Degeneff, |
Turkey |
|
|
623 |
Influence of the values of the coefficients in
Bertotti’s statistical expression on the loss figure computation in induction
motors |
P. Arboleya, G. Díaz, C.
González-Morán, J. Gómez-Aleixandre |
Spain |
Athina1
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
671 |
Accurate Monitoring of Rotor Modulating Signals for
Doubly-Fed Induction Machines in Wind Generation Systems |
A.Yazidi, G.A. Capolino, H. Henao, A. Bellini, F. Filippetti, C. Rossi, A. Stefani, D. Casadei |
|
|
|
553 |
New multipole decomposition method for the measured
magnetic signal |
O-Mun Kwon, Sheppard J. Salon, M.V.K. Chari, and
Jerry P. Selvaggi |
USA |
|
|
253 |
Multi-Slice FE Modelling of Induction Motors havinga
Broken Bar–Influence of Inter-Bar Currents and Bar Breakage Location |
J.
Gyselinck J. Sprooten and X.M. Lopez-Fernandez |
Belgium |
|
|
478 |
Test bed for virtual inertia variation to induction
machines diagnostic aims |
A. Bellini, C. Concari, G. Franceschini, E. Lorenzani, C. Tassoni, A. Toscani |
Italy |
|
|
655 |
Fault detection in the subsynchronous cascade drive
via time and frequency analysis of the rotor current space vector |
I. Tsoumas,
A. Safacas |
Greece |
Athina2
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
161 |
Calculation of the Optimal Fire Angles in
Single-Pulse Controlled Switched
Reluctance Generator Drives |
Christos Mademlis and Iordanis Kioskeridis |
Greece |
|
|
167 |
Evaluation of Switched Reluctance Motor Drives for
|
Cuneyt Karacan, H. Bülent Ertan |
Turkey |
|
|
493 |
A Novel Suggestion of |
M. Yoneda
, H.Dohmeki |
Japan |
|
|
541 |
Sensorless Vector Control Parameters Estimation of
Synchronous Reluctance Motor Using a Coupled FEM & Preisach Model |
Hong Seok Kim, Jung Ho Lee and Jang-Sung Chun |
Korea |
|
|
743 |
Speed Control of Axial Laminations Switched
Reluctance Motor Provided with Digital Pole Placement Controller |
H.M.Hasanien, N.H. Saad, M.A. Mostfa and M.A.Badr |
Egypt |
Athina3
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
273 |
Traction Drive Technology at Voith - Design Aspects
and Solutions |
Andreas
Lange |
Germany |
|
|
592 |
Development of Multi-layer Buried Permanent Magnet
Synchronous Machine for Vehicle Application |
Sang-Yeop Kwak, Jae-Kwang Kim, Sang-Yong Jung,
Cheol-Gyun Lee and Hyun-Kyo Jung |
Korea |
|
|
613 |
Global Optimal Design of a Traction Motor by a
Systemic Approach of the Electric Drive Train |
V. Mester,
F. Gillon and P. Brochet |
France |
|
|
355 |
A Three-Level Shunt Active Power Filter Controlled
with the Space Vector Pulse Width Modulation |
H.
Djeghloud, H. Benalla |
Algeria |
|
|
670 |
Analysis and Minimization of Output Current Ripple
of Five Phase PWM Inverters |
Pekik Argo
Dahono |
Indonesia |
Ariadne
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
528 |
|
J. Cros, N. Fontaines, V. Masson, J. Jeuvrey, M. Frenette, J. Figueroa, P. Viarouge |
Canada |
|
|
405 |
Development of Fish Robot Using Stacked-type
Electrostatic Actuators |
Y.Hata, K.Saneyoshi, K. Okuda |
Japan |
|
|
471 |
From Electromagnetic Modeling to Life Cycle
Assessment: A Complete Framework for Actuator Designing |
D. Ladas and V. Mazauric |
France |
|
|
632 |
Optimal Design of a Linear Permanent Magnet Actuator
for Active Roll Control in Automotive Applications |
L. Encica, J. Paulides, E. Lomonova, A. Vandenput |
Netherlands |
|
|
646 |
A Power Line Communication Approach for Automotive
Electromechanical Actuators |
E. Arabia, A. Consoli, C. Ciofi, R. Merlino, A.
Testa |
Italy |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
164 |
An electrical machine approach to power flow control
in power systems with wind integrations |
Marta
Molinas, Tore Undeland |
Norway |
|
|
168 |
A Stochastic Model for Isolated Eolian Installations |
J.
Fouladgar |
France |
|
|
173 |
Design Aspects and Performance Simulations of Wind
Turbine Generators |
X. Feng, G. Rupertus, H. Chen |
USA |
|
|
198 |
Application of Fuzzy Logic Control based Statcom to
stabilize Wind Turbine Generator System |
S.M. Muyeen, Mohammad Abdul Mannan, Mohammad Hasan
Ali, Rion Takahashi, Toshiaki Murata and Junji Tamura |
Japan |
|
|
227 |
Integration of Wind Energy in Competitive
Electricity Markets |
S. N. Singh and Demetrios P. Papadopoulos |
India |
|
|
242 |
Steady State Equivalent Model of PM Generators
Feeding Capacitor Loaded Diode
Bridges, for Wind Energy Generation |
A. Di Gerlando, G. M. Foglia, R. Perini, M. Ubaldini
|
Italy |
|
|
243 |
The State of the Art of Generators for Wind Energy
Conversion Systems |
Y. Amirat, M.E.H. Benbouzid, B. Bensaker, R. Wamkeue and H. Mangel |
France |
|
|
248 |
Wind Generator Stabilization by PWM Voltage Source
Converter and Chopper controlled SMES |
Mohd.
Hasan Ali, Toshiaki Murata, and Junji Tamura |
Japan |
|
|
316 |
A Study of Cooperative Operation of Flywheel
Generator and Hydrogen Electrolyzer with Wind Generator |
Masaaki Nobuta,
Rion Takahashi, Toshiaki
Murata, Junji Tamura |
Japan |
|
|
317 |
Fundamental Research of Hydrogen Production System
Using Variable Speed Wind Generator |
Hideyuki Nakabayashi, Rion Takahashi, Toshiaki
Murata, Junji Tamura |
Japan |
|
|
328 |
Dynamic Contribution Of DFIG Based Wind Plants To
System Frequency Disturbances |
M. Kayıkçı, J.V. Milanović |
UK |
|
|
349 |
Smoothing of the wind power production by a
geographical spreading of the wind farm: application to asynchronous doubly-fed
wind generators |
F. Vallée, J. Lobry and O. Deblecker |
Belgium |
|
|
396 |
Sources of harmonics in wind farms |
Y. Plotkin, D. Schulz, K. Hueneke, R. Hanitsch |
Germany |
|
|
366 |
Simulation Analysis of 2 MW Doubly Fed Induction
Generator Wind Turbine with Active Crowbar under Network Disturbance |
S. Seman, J. Niiranen, and A. Arkkio |
Finland |
|
|
375 |
A Grid-connected Photovolatic System using
Current-Source Inverter |
Joung-Min
Lim, Sang-Hun Lee, Sung-Jun Park, Chae-Joo Moon, Man-Hyung Lee |
Korea |
|
|
403 |
Influence of distributed generators on the harmonic
level of a 20 kV distribution network |
A. Dagoumas, A. Marinopoulos, F. Kinis, C.
Demoulias, P. Dokopoulos |
Greece |
|
|
448 |
Impacts of Distributed Generators on the Inrush
Transient of Distribution Power Transformers |
Navid Taghizadegan, M.B.B. Sharifian, A. Yazdanpanah Ghoharrizy |
Iran |
|
|
649 |
Optimal Matching Between a Permanent Magnet
Synchronous Machine and a Wind Turbine – Statistical Approach |
D. Morales, M. López, J-C. Vannier |
France |
|
|
723 |
Robust Nonlinear Control for Vibration Attenuation
in Variable Speed Wind Turbines |
A. G. Soldatos, S. A. Papathanassiou, M. P. Papadopoulos and A. G. Kladas |
Greece |
|
|
737 |
Simple control schemes for grid-connected
three-phase voltage-source inverters of DG units |
F. Gakis, S.Papathanassiou |
Greece |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
526 |
Operational Behaviour of Industrial DC Drives in
Paper Machines in Relation to Elastic Shafts Characteristics |
C.
Michael, A. Safacas |
Greece |
|
|
344 |
Accurate Torque Control of VSI Fed Synchronous
Machine Under |
M. Bekemans, F. Labrique, E. Matagne |
Belgium |
|
|
702 |
Brushless, Self-Excited Synchronous Field-Winding
Machine for |
Alexander
Rovnan, Heath Hofmann |
USA |
|
|
128 |
The New Methodology Of The Power Loss Calculation
Under Deformed Flux Conditions |
Z. Gmyrek, A.
Boglietti, A. Cavagnino |
Poland |
|
|
415 |
AC High Dynamometer for testing motor drive system |
Gildong Kim, Hanmin Lee, Sehchan Oh, Sunghyuk Park |
Korea |
|
|
341 |
Fast Prototyping of Vector Controllers for Interior
PM Synchronous Motors |
M.
Tursini, A. Scotti |
Italy |
|
|
379 |
Current Waveform Analysis of PWM Inverter-Fed
Permanent Magnet Synchronous Machine Accounting for Cross-Magnetization |
M. Kimura, K. Ide, H. Mikami |
Japan |
|
|
342 |
Sensorless Control of PM Synchronous Motors with
Luenberger Observer: Theoretical Issues and Implementation Results |
M. Tursini, A. Scafati, R. Petrella |
Italy |
|
|
460 |
Speed Control of Permanent Magnet Synchronous Motors
by Current Vector Control |
P.
Fernandez, J. A. Goemes and A. M. Iraolagoitia |
Spain |
|
|
626 |
Line-Start Permanent-Magnet Chemical Pump Drives |
A.C.Smith and E.Peralta Sanchez |
UK |
|
|
237 |
Versatile High Torque Direct Drive with
PM-Excitation and Duplex Stator Arrangement |
W.-R.
Canders, H. Mosebach, M. R. Rezaei |
Germany |
|
|
257 |
A Novel Drive Strategy for Vibration Suppression in
Permanent Magnet Brushless DC Motor |
Tao. Sun, Gen-Ho Lee, Jeng-Pyo Hong |
Korea |
|
|
129 |
Implementation of an active converter for high
quality dc drive performance |
N.N. Barsoum, S.K. Wong |
Malaysia |
|
|
155 |
Controlled |
Achmad Alyan and Raul Rabinovici |
Israel |
|
|
307 |
Determination of the Optimum Power Factor and
Efficiency of a Characteristic DC Drive System via Simulation |
K.
Georgakas, A. Safacas, I. Georgakopoulos |
Greece |
|
|
440 |
Optimal Integral State Feedback controller for a DC
motor |
H. Delavari, GH. Alizadh, M.Sharifian, |
Iran |
|
|
255 |
Simplified sensorless control technique for wound
rotor synchronous motor |
F.
Chabour, J. P. Vilain, P. Macret, P. Masson, L. Kobylansky |
France |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
170 |
Design and Built of on - Load Fully Electronic
Tap-Changer with Triac Switch: Simulation and Practical Results |
M. Ardebili, K. Abbaszadeh, A.R. Alaei |
Iran |
|
|
238 |
Design and Reviewing Features in Transformers used for Power Electronic
Converters |
G. M.
Foglia, M. Ubaldini |
Italy |
|
|
291 |
Finite Element Calculation of Winding type Effect on
Leakage Flux and Electromagnetic Forces in Distribution Transformers |
M.B.B. Sharifian, J. Faiz, M. Ghadimi, G. Ahrabian |
Iran |
|
|
533 |
Characteristics of Transformer using Wound Type of
Linear Induction Motor |
N. Fujii, K. Hayashi and T. Mizuma |
Japan |
|
|
407 |
Fuzzy Logic for Diagnostic in Power Transformers |
M.Z.Fortes, H.P. Amorim Junior, A.C.Dominguetti
Junior and R.M.Abrota |
Brazil |
|
|
431 |
Reduction of Winding Leakage Flux and
Electromagnetic Forces in Single Phase Shell Type Transformers Using Genetic
Algorithms |
A.M. Kashtiban, N. Taghizadegan, G. Alizadeh, M.B.B Sharifian |
Iran |
|
|
470 |
Methodology for the Optimum Design of Power
Transformers using minimum number of input parameters |
|
Greece |
|
|
510 |
Finite Element Based Methodology for the Accurate
Prediction and Minimization of No Load Loss in Power Transformers |
AnastasiaJ. Tsivgouli, Marina A. Tsili, Pavlos S. Georgilakis, Antonios G. Kladas, A. T. Souflaris and D.
G. Paparigas |
Greece |
|
|
596 |
A Detailed Single-Phase Core-Type Transformer Model
Based on Jiles-Atherton Theory of Ferromagnetic Hysteresis |
A. D. Theocharis, J. Milias-Argitis, Th. Zacharias |
Greece |
|
|
599 |
Executable Heterogeneous Model of an Adaptive Fuzzy
Logic Controller and Switchable Engergy Efficient Distribution Transformer |
R. Kiefer
and Sam Ali |
Australia |
|
|
643 |
Exposure to magnetic fields in the vicinity of
transformers |
E. Mimos
D. Tsanakas A. Tzinevrakis |
Greece |
|
|
663 |
An Analytic Method for Optimal Location of Internal
Shield within A Disk Winding |
R.C.Degeneff , S. J. Salon , L.T. Ergene |
USA |
|
|
708 |
Variable
Frequency Transformer Concept |
Arezki
Merkhouf |
Canada |
|
|
714 |
Zero-sequence flux protection of a three-limb core
power transformer |
M.A.Tsili, S.A.Papathanassiou |
Greece |
|
|
664 |
A General Method for Including Core Losses in a
Lumped Parameter Transformer Models |
R.C.Degeneff , |
USA |
|
|
715 |
A New Method for Estimation of Loss of Life of Power
Transformer Supplying Nonlinear Loads |
P. Naderi, A.
Farshidnia |
Iran |
|
|
148 |
Design of Permanet Magnet Compact Inductor for
Frequency Converter |
A.
Belahcen, P. Pieteris, P. Virolainen |
Finland |
|
|
219 |
Application of pattern recognition method to the
diagnosis in induction machine |
O. Ondel,
E. Boutleux, G. Clerc |
France |
|
|
268 |
Contactless Energy Transfer for Office and Domestic
Applications |
C.L.W. Sonntag, E.A. Lomonova, J.L. Duarte, A.J.A.
Vandenput, and A.J.M. Pemen |
Netherlands |
|
|
310 |
Three-dimensional Reluctance Network Analysis of an
EIE-Core Variable Inductor and Application to Automatic Voltage Regulator |
K. Nakamura, T. Tomonaga, S. Akatsuka, T. Ohinata,
Y. Sato, and O. Ichinokura |
Japan |
|
|
603 |
Design and study of a saturated DC reactor fault
current limiter (FCL) |
M. B. B. Sharifian, N. Taghizadegan, and M. Abapour |
Iran |
|
|
690 |
An Optimized Design of Solenoids in an Intake Valve
Train System |
Long Wu, Aristidis Zachas, Ronald G. Harley, and J.
Rhett Mayor |
USA |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
101 |
Mathematical Model of the Electric Vehicle Autonomy |
S. Tounsi, R. Neji and F. Sellami |
Tunisie |
|
|
147 |
Design of Permanent Magnet Synchronous Machine for
Electrical Vehicle |
A. Belahcen, J. Perho, S-Y Jung |
Finland |
|
|
319 |
Integration of an Induction Machine Synthesis in a
Multiphysic Simulation tool for Automotive Applications |
J. Legranger, G. Friedrich, R. Trigui, F. Badin |
France |
|
|
336 |
Comparing the Conventional Control Method and the
Fuzzy Control Method in Hybrid Fuel cell Electric Vehicle |
M.
Amirabadi, Sh. Farhangi |
Iran |
|
|
350 |
A Self-Reconfigurable and Fault-Tolerant Induction
Motor Control Architecture for Hybrid Electric Vehicles |
M. Zeraoulia,
D. Diallo and |
France |
|
|
400 |
Sliding Mode Control of EV Electric Differential
System |
A. Haddoun, M. E. H. Benbouzid, D. Diallo, R. Abdessemed, J. Ghouili and K. Srairi |
France |
|
|
414 |
Analysis of Voltage Unbalance on Korean Railway
System |
Hanmin Lee, Gildong Kim, Changmu Lee, Sehchan Oh, Sunghyuk Park |
Korea |
|
|
476 |
Comparison of the Field Oriented and Direct Torque
Control Methods for Induction Motors used in Electric Vehicles |
A.D. Karlis, K. Kiriakopoulos, D.P. Papadopoulos and
E.L. Bibeau |
Greece |
|
|
104 |
Voltage and Current Disturbance Elimination with Reactive Power Compensation Using
Unified Power Quality Conditioner |
T. Benslimane, K. Aliouane, B. Chetate |
Algeria |
|
|
107 |
Design of
Fixed-Gain PID Controller for Use with a Static Var Compensator |
John Ch. Dermentzoglou, Demetrios P. Papadopoulos |
Greece |
|
|
162 |
Off-Line Fuzzy Compensation Technique Applied on the
Load Characteristics of a DC to DC
Converter Using Microcontroller |
Ahmed Massoud, Mahmoud Masoud, and Mohamed El-Hawary |
Egypt |
|
|
377 |
The operating system of high-power LED module with
Back-Boost mode |
Sung Geun Song, |
Korea |
|
|
395 |
DC Offset at PWM-Inverter Output due to Tolerances
of the Optical Link Junction for IGBT-Control Signals |
Y. Plotkin, M. Centner, D. Schulz, R. Hanitsch |
Germany |
|
|
420 |
Analysis and design of a current fed resonant
converter applied to high-frequency magnetic cores measurements |
G. Tselos, G. Dimitrakakis, E.C. Tatakis |
Greece |
|
|
543 |
Modeling of synchronous motor fed load-commutated
converter considering the sub-transient quantities |
V. Manoliu |
Romania |
|
|
560 |
Design Solutions for High Current Fast Switching
Power Stage with Paralleled MOSFETs for Dual Axes PMSM Drives |
R. Nalepa, J. Muckian, H. Levy, M. Kearney |
Ireland |
|
|
568 |
Active Harmonic Filter Behaviour in a Twelve-Pulse
Front-End Rectifier Under Faulty Conditions |
Adérito N. Alcaso, A. J. Marques Cardoso |
Portugal |
|
|
625 |
Current THD Improvement using predictive control of
3-level PWM Rectifier in DTC high power Induction Motor Drives using 3-level
Inverters |
G. Brando, A. Dannier, A. Del Pizzo |
Italy |
|
|
644 |
Requirements and Implementation of an AC-to-DC Power
Converter for Micro Wind Turbine |
O-P.Laitinen T.Lindh J.Ahola |
Finland |
|
|
605 |
Minimization of torque oscillations in DTC-Induction
Motor Drives using Multilevel Inverters |
G. Brando, A. Dannier, A. Del Pizzo |
Italy |
|
|
721 |
On Power Factor Correction considering Energy
losses, in Medium Size Industrial Plants with Non Linear Loads |
P. Vallianatos, N. Tasios, M. Hatzistefanou, S.Manias |
Greece |
|
|
724 |
Converter for Switched Reluctance Generator With
Variable DC-Link Voltage for High Speed Applications |
Lipták, M., Rafajdus, P., Hrabovcová,
V |
|
Athina1
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
152 |
Detection of winding faults in windmill generators
using the Wavelet Transform Analysis method |
Zacharias
Getsis, Michalis Zervakis and George Stavrakakis |
Greece |
|
|
360 |
Comparison of generator topologies for direct-drive
wind turbines including structural mass |
A.S.
McDonald, M.A. Mueller and H. Polinder |
UK |
|
|
424 |
Analysis of A Novel Transverse Flux Generator in
Direct-driven Wind Turbines |
D.
Svechkarenko, J. Soulard, and C. Sadarangani |
Sweeden |
|
|
499 |
Design criteria and analysis of a 75 kW brushless
doubly-fed asynchronous generator prototype for wind power systems |
R. Carlson, F. Runcos, H. Voltolini, P. Kuo-Peng, N.
J. Batistela |
Brazil |
|
|
733 |
Generic Model and Control Modes for a Full-Converter
Synchronous Wind Generator |
G.
Tsourakis, E. Farantatos, and C. D.
Vournas |
Greece |
Athina2
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
339 |
Comparison of Synchronous PM Machine Types for |
Ayman M.
EL-Refaie, Thomas M. Jahns |
USA |
|
|
153 |
Fault Detection and Isolation based PI Controllers On-Line Tuning for Permanent
Magnet Synchronous Machines |
E. Altamiranda, E. S. Hamdi |
Sweden |
|
|
138 |
Inductance Harmonics in Permanent Magnet Synchronous
Motors and Reduction of Their Effects in Sensorless Control |
A. Piippo and J. Luomi |
Finland |
|
|
491 |
Interactive Modeling and Simulation of a six step
continuous current mode Inverter fed |
Narayanaswamy. P.R. Iyer, Jianguo Zhu |
Australia |
|
|
524 |
On the Influence of Saturation and Mutual Coupling
of both Orthogonal Magnetic Axes on a MTPA Controlled Interior PMSM Drive |
Frederik M.L.L. De Belie, Thomas J. Vyncke, Jan A.A.
Melkebeek, Kristof R. Geldhof, Lieven Vandevelde and Ren´e K. Boel |
Belgium |
11:40-13:20
ORAL SESSION OTM3: TRANSFORMERS
Athina3
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
281 |
A Novel Approach to Reducing Inrush Current in Power
Transformer |
M.B.B. Sharifian, N.Taghizadegan, M. Abapour |
Iran |
|
|
210 |
Assessment of ELF- Magnetic Field Exposure in Power
Transformer Rooms |
Carlos F. R. Lemos Antunes |
Portugal |
|
|
209 |
Core Effects Modeling For Three Phase
PowerTransformers |
Jorge Pleite, Carlos Gonzalez, Juan Vazquez, Antonio
Lazaro |
Spain |
|
|
370 |
Time Domain Analysis of Power Transformers by a
Hybrid Quasi-Static FD – FE Technique |
T. I.
Kosmanis, T. V. Yioultsis and T. D. Tsiboukis |
Greece |
|
|
325 |
Stray Losses in Transformer Clamping Plate |
Z. Janic, Z. Valkovic, Z. Stih |
Croatia |
Ariadne
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
320 |
Testing of Electric Machines with a Dedicated System
for Data Acquisition and Processing |
Voicu Groza, Marius Biriescu, Vladimir Creţu,
Gheorghe Liuba, Marţian Moţ , Gheorghe Madescu |
Romania |
|
|
197 |
The increase of the magnetic noise of induction
motors due to the low order excitation modes generated by the rotor
eccentricity |
S.L. Nau, R. Beck, H.L.V. dos Santos, N. Sadowski,
R. Carlson |
Brazil |
|
|
452 |
Monitoring of Induction Motors Rotor Faults by non
invasive sensors |
A. Bellini, C. Concari, G. Franceschini, C. Tassoni, A.
Toscani |
Italy |
|
|
505 |
Acoustic Noise and Displacement Analysis of a
3-phase Transformer Core Under Sinusoidal and PWM Excitations |
X G |
UK |
|
|
546 |
Optimal Design to reduce Acoustic Noise in Interior
Permanent Magnet Motor using Response Surface Methodology |
Sang-Ho Lee, Suk-Hee Lee, Jung-Pyo Hong, Sang-Moon Hwang, Ji-Young Lee, and Young-Kyoun Kim |
Korea |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
389 |
Analysis of a PM Generator-Rectifier
System for Wind Energy Applications |
M. Andriollo, G. Bettanini, A. Morini, G.
Martinelli, A. Tortella |
Italy |
|
|
356 |
Combined Field and Circuit Theory for Non Linear
Material Applied on Wind Turbine Generators |
Oliver
Drubel, Sven Exnowski |
Germany |
|
|
429 |
Modeling a Fuel Cell Generator set for DC
Transient-State studies |
G.
Petropoulos, J. Prousalidis |
Greece |
|
|
432 |
Study and Accomplishment of a checked model for an
Outer-Rotor PM Synchronous Generator for Wind Turbines |
A. Olano, V. Moreno, J. Molina, I. Zubia |
Spain |
|
|
441 |
Condition Monitoring of |
M. R. Wilkinson and P. J. Tavner |
UK |
|
|
428 |
Contribution of wind farms to active and reactive
power control requirements set by system operator |
I. Zubia,
X. Ostolaza |
Spain |
|
|
547 |
Genetic Algorithm Model for Profit Maximization of
Generating Companies in Deregulated Electricity Markets |
P.Georgilakis |
Greece |
|
|
593 |
Simulation and control of a variable speed wind
turbine equipped with a multi-pole synchronous generator |
S. Papaefthymiou and S. Papathanassiou |
Greece |
|
|
597 |
Reliability and Economic Evaluation of Small
Autonomous Power Systems containing only Renewable Energy Sources |
Yiannis A. Katsigiannis, Pavlos S. Georgilakis |
Greece |
|
|
607 |
Use of a variable-reluctance magnet machine (VRMM)
for a direct driven wind generator. Analytical design |
I Mény, J.R. Didat, P. Enrici, D. Matt |
France |
|
|
651 |
Torque and Speed Control of Pitch Regulated Doubly
Fed Induction Generator |
Bouaouiche
T, Machmoum M |
France |
|
|
785 |
Dynamic Modelling
of an Experimental Power Plant from Sea Waves |
C.M. |
Greece |
|
|
814 |
Control Considerations for a Grid Connected Variable
Speed Wind Turbine |
Antonios
E. Haniotis, Antonios G. Kladas and John A. Tegopoulos |
Greece |
|
|
283 |
Simulation Models of Fuel Cell Systems |
Chiara Boccaletti, Gerardo Duni, Gianluca Fabbri,
Ezio Santini |
Italy |
|
|
182 |
Stabilization of rotor shaft of fly wheel energy
storage system by controlling armature currents of motor generator |
O. Tsukamoto, A. Utsunomiya and T. Fu |
Japan |
|
|
616 |
Design considerations for die-cast rotor
induction-motors operating at a speed of 30.000 rpm |
M. Centner, R. Hanitsch |
|
|
|
301 |
Short Time Voltage Build up Method of Induction
Generator for Flywheel UPS |
Takeshi Shibayama, Ismet Rahmad Kartono, Hideo
Dohmeki |
Japan |
|
|
315 |
Frequency Stabilization of Small Power System by
using Flywheel Energy Storage System |
Rion
Takahashi, Junji Tamura |
Japan |
|
|
364 |
Experimental Performance Evaluation of a High Speed
Permanent Magnet Synchronous Motor and Drive for a Flywheel Application at
Different Frequencies |
A.S.
Nagorny |
USA |
|
|
473 |
On starting-up large power motors rotating high
inertia loads in autonomous systems |
P.
Vallianatos, J. Prousalidis and E. Styvaktakis |
Greece |
|
|
699 |
Wind Diesel System for DC bus coupling with |
M. El Mokadem, C. Nichita, P. Reghem and B. Dakyo |
|
14:30-15:40
POSTER (DIALOGUE) SESSION PTA2: VARIABLE RELUCTANCE
MACHINES
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
143 |
Developing an Iron Loss Model for SR Machines |
J. T. Charton, J. Corda, J. M. Stephenson and S. P.
Randall |
UK |
|
|
208 |
A New and Fast Design Methodology for a New Linear
Switched Reluctance Motor Taking Performance Evaluation and Track Constraints
into account |
D.S.B. Fonseca, C.P. Cabrita and M.R.A. Calado |
Portugal |
|
|
226 |
Dynamic Performance Analysis on Switched Reluctance
Motors and Iron Loss Calculation using the Finite Element Method |
Alexandros
Michaelides and Christos Mademlis |
UK |
|
|
240 |
Desgin and Analysis of a SRM for a Hybrid Electric
Vehicle |
Jaewon
Moon, S. J. Salon, Lale Ergene |
USA |
|
|
286 |
Performance Estimation of Switched Reluctance Motor
by Using Decision Tree Learning Algorithms |
Behzad Mirzaeian Dehkordi, Reza Zafarani, Payman
Moallem |
Iran |
|
|
300 |
Consideration of 8/6 Switched Reluctance Generator
Excited by Suppression Resider Converter |
A. Takahashi, H. Goto and O. Ichinokura |
Japan |
|
|
309 |
Reluctance Network Analysis of an SR motor
Considering Iron loss characteristics and Optimum Direction of the Excitation |
K. Nakamura, S. Fujio, and O. Ichinokura |
Japan |
|
|
241 |
Effect of Space Harmonics on the Transient and
Steady-State Behavior of a Line-Start Synchronous Reluctance Machine |
T. Lubin,
T. Hamiti, H. Razik and A. Rezzoug |
France |
|
|
425 |
Optimization of the size of the meshed zone for the
coupling FEM-PNM: Example on a switched reluctance motor |
Binjie
Dong, Fabien Sixdenier, Laurent Morel, Benjamin Guinand |
France |
|
|
479 |
Rotor cage currents during line-start of 3 phase
synchronous reluctance motor |
D. Miljavec, B. Zidaric M. Zagirnjak |
Slovenia |
|
|
564 |
Assessment of Linear Variable Reluctance Motor
Performance Limits via Finite Element Modeling |
Raga Ahmed and David G. Taylor |
USA |
|
|
530 |
Saturated
Double Salient Reluctance Motors |
Chang J H, Kang D H, Viorel I-A, Tomescu Ilinca,
Strete Larisa |
Korea |
|
|
534 |
Rotor Design on Torque Ripple Reduction for a
Synchronous Reluctance Motor with Concentrated Winding using Response Surface
Methodology |
Jung-Min Park, Seong-June Park, Min-Myung Lee,
Jang-Sung Chun ,Jung-Ho Lee |
Korea |
|
|
536 |
Anisotropy Rotor Design of Synchronous Reluctance
Motor Using a Coupled FEM & Preisach Model |
Rae Hwa Lee, Min Myung Lee, Jang Sung Chun and Jung Ho Lee |
Korea |
|
|
537 |
Rotor design functional standard of Synchronous
Reluctance Motor according to torque/volume using FEM & SUMT |
Rae hwa
Lee, Min Myung Lee and Jung Ho Lee, |
Korea |
|
|
558 |
Nonlinear Magnetic Circuit Model of a Linear
Variable Reluctance Motor Using Boundary Element Methods |
Nattapon Chayopitak and David G. Taylor |
USA |
|
|
573 |
Effects on Reducing Torque Ripple of SR Motors Using
Freewheeling Mode |
Mirai Sato, Hiroki Goto, H. J. Guo, Osamu Ichinokura |
Japan |
|
|
619 |
An analytical approach to the magnetizing inductance
computation for the synchronous reluctance motor with axially laminated rotor |
I.Torac |
Romania |
|
|
657 |
On The Performance improvement of a Low Speed
Switched Reluctance Machine With Permanent Magnet Excitation |
R.Saou, K. Alitouche,M.E.Zaim |
France |
|
|
668 |
Using Salient AC Machines as Virtual Resolvers |
A.
Consoli, G. Scarcella, G. Scelba, A. Testa, D. Triolo |
Italy |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
112 |
Volume and Surface Force Densities of Interacting
Electromagnetic and Mechanical Sub–Systems and their Visualization |
C. Grabner |
Germany |
|
|
132 |
Shielding Effectiveness of Static and Low Frequency
Electric and MagneticFields |
Jordi-Roger
Riba, Xavier Alabern Morera |
Spain |
|
|
139 |
The electromagnetic field as a base for determination
of the main AC machines parameters |
Janush B. Danilevich, Irina Yu. Kruchinina, Yuvenaliy Ph. Khozikov |
Russia |
|
|
146 |
Analysis of Rotating Magnetic Device by Surface
Current method |
M. Arehpanahi and J. Milimonfared |
Iran |
|
|
150 |
The Partial Element Equivalent Circuit – PEEC –
modelling : the problem of capacitance
integration |
C. Gillot, R. Scorretti and G. Rojat |
France |
|
|
184 |
Space phasor diagrams and equivalent circuits to
analyze synchronous machines steady states |
Miguel Angel Rodriguez Pozueta, Luis Fernando
Mantilla Penalba |
Spain |
|
|
195 |
Space Vector Modulation in abc Coordinates:
Simplifing the Algorithm |
G.
Varsamis, A. Safacas |
Greece |
|
|
271 |
3D Field-Circuit Coupled Finite Element Analysis of
a Plunger Core Reactor |
Erich
Schmidt, Peter Hamberger |
Austria |
|
|
381 |
Analysis of Field Currents and Reactances for
Adjustable-Speed Pumped-Storage Generators Considering Rotor Duct Pieces |
K. Shima,
K. Ide, M. Takahashi, M. Okada, and O. Nagura |
Japan |
|
|
454 |
Structure-Dynamic Analysis of an Induction Machine
with Eccentric Rotor Movement |
C. Schlensok, D. van Riesen, K. Hameyer |
Germany |
|
|
680 |
Multiple
Coupled Circuit Modeling of squirrel-cage Induction Motors Including Space
Harmonics and Line Neutral Voltage |
F. Babaa, M.E.K. Oumaamar, A. Khezzar and M.
Boucherma |
Algeria |
|
|
481 |
Automatic Simulating System of Gearbox Service Load |
V.
Dynybyl, P. Žák |
Czech Republic |
|
|
483 |
Dysfunctions of rotating magnetic density sorters
induced by the distribution of the magnetic field and the dynamic behavior of
particles |
J.P. Vilain, S. Vivier |
France |
|
|
484 |
Availability Analysis of 700 kVA Generating set
Using FMECA and Fault Tree Methods |
B. Nadji |
Algeria |
|
|
503 |
Differential Leakage Reactance in Multiphase Induction
Machines |
G.
Joksimovic |
Serbia |
|
|
515 |
High performance 2D finite element modelling of
rotating electrical machines |
C. Doucet, G. Lacombe, I. Charpentier, J.-L. Coulomb,
C. Guérin |
France |
|
|
520 |
Combined 2D – 1D Time-Harmonic Model for Analysis of
Rotating Electrical Machines |
J. Pippuri and A. Arkkio |
Finland |
|
|
567 |
Instantaneous Electromagnetic Torque/Force
Estimation in Electrical Motors using the Finite Element Method – a Review |
M. Popescu, D. G Dorrell and M. I. McGilp |
UK |
|
|
722 |
AC Tacho-Generator Finite element analysis |
Virgiliu
Fireteanu |
Romania |
|
|
634 |
Utilization of rotating magnetic field as power tool
in electromagnetic nondestructive evaluation |
Raimond Grimberg, Lalita Udpa, Adriana Savin, Rozina
Steigmann, Alina Bruma, Satish S.Udpa |
Romania |
|
|
142 |
Induction Motor Model for Taking Into Account Additional Losses |
A. Boglietti, A. Cavagnino, M. Lazzari |
Italy |
|
|
222 |
3-Dimensional Calculation of the Magnetic Field in
the End Region of Hydrogenerators at Various Steady-State Operation
Conditions |
Georg
Traxler-Samek, Alexander Schwery and Daho Taghezout |
Switzerland |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
179 |
Diagnosis of Broken Bars in Large Induction Motors
by Leakage Flux Perturbation |
C.G. Dias, I.E. Chabu, J.R. Cardoso |
Brazil |
|
|
186 |
Fault Diagnostics of Voltage-Fed Inverter System for
|
Ibrahim F. El-Arabawy, Mahmoud Masoud, Mohamed A.
Awadallah and Gamal M. Mahmoud |
Egypt |
|
|
224 |
Detection of mechanical faults in asynchronous
machines based on wavelet analysis of the stator current |
I. Tsoumas, E. Mitronikas, A. Safacas |
Greece |
|
|
331 |
Induction Motors Bearing Failures Detection and
Diagnosis Using a RBF ANN Park Pattern Based Method |
I.Y. Önel, |
France |
|
|
392 |
Time Stepping Finite Element Analysis of Rotor
Broken Bars Three-phase Squirrel-cage Induction Motor |
Jawad Faiz, B.M. Ebrahimi |
Iran |
|
|
422 |
Intelligent Fault Diagnosing of Bearings in Rotating
Machinery (a Novel Approach) |
Alireza Sadoughi, Soheil Tashakkor, Mohammad
Ebrahimi |
Iran |
|
|
430 |
Induction Motor Broken Bar Diagnosis by Simultaneous
Current and Vibration Sampling |
M. Ebrahimi, A. Sadoughi, M. Bayat |
Iran |
|
|
462 |
Synchronous Machine Diagnosis Using an External
Magnetic Flux Sensor |
D. Thailly, R. Romary, J.-Ph. Lecointe, J.
F. Brudny, P. Suau |
France |
|
|
466 |
Real Behavior of Induction Motor Bar Breakage
Indicators and Mathematical Model |
C.
Bruzzese - O. Honorati - E. Santini |
Italy |
|
|
502 |
Instantaneous Real Power Signature Analysis as a
Tool for Airgap Eccentricity Diagnostics in Three-Phase Induction Motors |
M’hamed Drif A. J. Marques Cardoso |
Portugal |
|
|
600 |
Practical Evaluation of the Welch, Burg and Multiple
Signal Classification Methods applied to the Detection of Rotor Broken Bars
of Induction Motors |
Luís A. Pereira, Dênis Fernandes,
Daniel S. Gazzana, Fausto B. Líbano |
Brazil |
|
|
628 |
Assessment of Bar Current in Induction Machines with
Broken Bars Using a Multi-Sliced Fınite Element Model |
P. J.
Holik and D. G Dorrell |
UK |
|
|
666 |
A comparative investigation of electrical parameters
for fault detection and condition monitoring in induction motors - stator
winding current and electromagnetic flux |
M. Negrea, P. Jover, A. Arkkio |
Finland |
|
|
738 |
Analysis and diagnosis of induction motor faults in
high-performance drives |
S. M. A. Cruz, A. J. M. Cardoso |
Portugal |
|
|
679 |
Diagnostics of Broken Rotor Bars in Induction
Machines Using the Neutral Voltage |
M.E.K. Omaamar, F. Babaa, A. Khezzar and M.
Boucherma |
Algeria |
|
|
686 |
Detection of the Combination of Static and Dynamic
Air gap Eccentricity in 3-Phase Induction Motors using Stator Current
Monitoring |
Irahis
Rodriguez, Roberto Alves |
Venezuela |
|
|
700 |
Comparative Study of Voltage Sag Effects on Complete
and Reduced-Order, Single and Double-Cage Models of Induction Motor |
H. Martín, J. Pedra, J. Llaverías, R.
Bargalló |
Spain |
|
|
701 |
Impact of harmonic voltage distortion on the voltage
sag behaviour of adjustable speed drives |
K.
Stockman, J. Desmet, R. Belmans |
Belgium |
|
|
711 |
Diagnostic System for On-line Monitoring of
Induction Motor Drives |
R. Fiser,
M. Bugeza, H. Lavric |
Slovenia |
|
|
665 |
Analysis of an Axial flux PM Machine with Field
Weakening Capability under Symmetric Fault Condition |
Álvaro
Letelier, Juan A. Tapia, Rogel Wallace, Anibal Valenzuela |
Chile |
|
|
675 |
Design Characteristics of a Real Time Fault
Classifier for Generators and Transformers in Power Plants |
C.C. Kontogiannis, A.N.Safacas |
Greece |
|
|
681 |
Comparative Study between Inter-turn Short-Circuits
and Unbalanced Voltage Supply in Induction Machines |
F. Babaa, M.
Y. Kaikaa, A. Khezzar and M. Boucherma |
Algeria |
|
|
561 |
Low Frequency Filtering for the Diagnosis of Cage Asymmetries
in Induction Machines |
J. A.
Antonino, J. Rusek, M. Riera, J. Roger-Folch |
Spain |
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
158 |
The temperature distribution of the stator bar in
the evaporative cooling system of the large hydro-generators |
Feihui Liu, Lin Ruan, Guobiao Gu |
China |
|
|
159 |
A Thermal Hydraulic Model and its Application on
Electrical Machines |
F. Bachinger,
P. Hamberger |
Austria |
|
|
160 |
Dynamic thermal analysis of an induction servomotor
with coupled electromagnetic-thermal model |
J.
Puranen, J. Pyrhonen |
Finland |
|
|
194 |
Drive of Nonconvectional Stator Winding Slot Cooling
by Water |
R. Vlach |
Czech Republic |
|
|
236 |
Cooling and Thermal Modelling Aspects of Tooth
Coil, Permanent Magnet Synchronous
Machines |
A. Di Gerlando, G. M. Foglia, R. Perini, M. Ubaldini |
Italy |
|
|
324 |
A Novel Lumped Parameter Thermal Model for
Electrical Machines |
G. Dajaku,
D. Gerling |
Germany |
|
|
418 |
Investigation of the Thermal Behavior of a Salient
Pole Synchronous Machine |
H. Lang, C. Kral, A. Haumer, M. Haigis, R. Schulz |
Austria |
|
|
474 |
CFD Validation and Air Cooling Design Methodology
for Large Hydro Generators |
R. Dépraz, F. Avellan,A. Schwery, R. Zickermann |
Switzerland |
|
|
494 |
Measurements of Thermal Resistance on Ready-made
Induction Motors |
Jerzy
Mukosiej |
Poland |
|
|
559 |
Thermal Analysis of a Linear Permanent-Magnet Motor
with Concentrated Windings |
Nattapon Chayopitak and David G. Taylor |
USA |
|
|
707 |
Thermal characterisation of electrical steels and
thermal sensitivity analysis of a 7.5 kW induction machine |
E. Hoferlin, B. Soenen, M. De Wulf, S. Jacobs |
Belgium |
Athina1
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
111 |
A new approach for securing efficient operation of a
water-pumping system fed by a PV generator |
Demetrios P. Papadopoulos, Sotirios B. Skretas |
Greece |
|
|
376 |
High efficient
the load dispersion a new PV tracking system |
Hyung-lae Choi, |
Korea |
|
|
705 |
A Maximum Power Point Tracking algorithm for
photovoltaic power systems with the control of the output voltage |
F. Esposito, V. Isastia, S. Meo, L. Piegari |
Italy |
|
|
256 |
Control of Linear Electrical Generators for Direct
Drive Wave Energy Conversion |
J.K.H.
Shek, D.E. Macpherson, M.A. Mueller |
UK |
|
|
461 |
Design methodology of an electromagnetic generator
for wave energy conversion |
M. Ruellan, H. Ben Ahmed, B. Multon, A. Babarit, A.
Clement |
France |
Athina2
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
409 |
Rotor Shape Design of a Switched Reluctance Motor |
I. Gourragui,
F. Léonard, G. Abba, and J-C. Vivalda |
France |
|
|
321 |
Calculation of Characteristics of an SR Motor with
Divided Stator Cores Made of Grain-oriented Silicon Steel |
K. Murota, K. Nakamura, and O. Ichinokura |
Japan |
|
|
410 |
Multi-Objective Optimal Design of Linear Variable
Reluctance Motors Using Genetic Algorithms |
Matthew B. Hortman, Nattapon Chayopitak, and David
G. Taylor |
USA |
|
|
608 |
The Use of Segmental Rotors for 2 Phase
Flux-Switching Motors |
B.C. Mecrow, T.J. Bedford, J. Bennett and T. Celik |
UK |
|
|
501 |
Design of High Performance Synchronous Reluctance
Motors by Finite Element Analysis and Optimization Algorithm: Prototype And
Test |
F Parasiliti, M. Tursini, M. Villani |
Italy |
Athina3
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
228 |
A simulation tool linking hydroelectric production
sites and electrical networks |
J.-J. Simond, Ph. Allenbach, C. Nicolet, F. Avellan |
Switzerland |
|
|
308 |
Simulation of Small Hydro Generators in Islanding
Operation in weak Distribution Networks |
A.
Dagoumas, A. Marinopoulos, G. Papagiannis, P. Dokopoulos |
Greece |
|
|
576 |
Finite Element Assisted Study of Magnetic
Configurations of Flat Pickups for Inductively Coupled Power Transfer Systems |
D. Kacprzak, J. K. Sykulski |
UK |
|
|
713 |
Generalized Analysis of Electromechanical Devices
Using Pseudo-Linear Transformations |
P.
Bolognes |
Italy |
|
|
718 |
Theoretıcal Analysıs of the ELCID Method
Usıng QuıckFıeld FEA package |
V. M. Gandshu, V.V.Gorodov, S.D. Dubitsky, V.G.
Podnos |
Canada |
Ariadne
Room
|
No |
Ref |
Paper
title |
Authors |
Country of the corresponding author |
|
622 |
On stator yoke rotational iron losses in permanent
magnet machines |
T. Modeer |
Sweden |
|
|
624 |
Analysis of the core loss data fitting alternatives
for induction motor loss computation |
P. Arboleya, A.Barrera, C. González-Morán, G. Díaz, J. Gómez-Aleixandre |
Spain |
|
|
117 |
Experimental Approach to the End-Windings Cooling
Effects in Induction Motors |
A.
Boglietti, A. Cavagnino |
Italy |
|
|
380 |
Comparison of Measurements with a CFD Analysis and a
Thermal Equivalent Circuit Model of a TEFC Induction Machine |
C. Kral, A. Haumer, M. Haigis, H. Lang, H. Kapeller |
Austria |
|
|
688 |
A Complex Space Vector Approach to Rotor Temperature
Estimation for Induction Machines with Impaired Cooling and Unbalanced Supply |
Zhi Gao, Thomas G. Habetler and Ronald G. Harley |
USA |
Athina1
Room